Aluma Blast Detail Paint Quart

Aluma Blast Paint is specially formulated to duplicate the original look of cast aluminum car parts. Protected up to 250 degrees F by this paint, metal parts will keep that brand new look for a long time. Available in aerosols and quarts. One aerosol covers 6 sq.ft., one quart covers 50 sq.ft., acrylic lacquer, natural low 4-15% gloss. Great on intake manifolds and transmission housings. Buy 3 or more, mix and match, and SAVE!

Aluma Blast Paint Aerosol 12 oz

Aluma Blast Paint is specially formulated to duplicate the original look of cast aluminum car parts. Protected up to 250 degrees F by this paint, metal parts will keep that brand new look for a long time. Available in aerosols and quarts. One aerosol covers 6 sq.ft., one quart covers 50 sq.ft., acrylic lacquer, natural low 4-15% gloss. Great on intake manifolds and transmission housings. Buy 3 or more, mix and match, and SAVE!

Brake Caliper Coating Gray Aerosol 12 oz

Are your brake drums and calipers visible behind those fancy wheels? Then restore them to the correct OEM color. At the same time protect against corrosion - all in one easy application. The Brake Caliper Coating (gray, 12 oz. aerosol can) provides excellent protection for cast iron (NOT ALUMINUM) parts and maintains that "freshly cast" factory finish. Acrylic lacquer, max temp 250 degrees F, 4-15% gloss. One can covers 6 sq.ft., enough for 4 brake calipers.

Brake Drum Coating Aerosol 15 oz

Are your brake drums and calipers visible behind those fancy wheels? Then restore them to the correct OEM color. At the same time, protect against corrosion - all in one easy application! The Brake Drum Coating (black, 15 oz aerosol can covers 8 sq.ft.- enough to do all four drums) works over bare metal or over Eastwood Rust Encapsulator. Resists chip, salt and corrosion. Modified epoxy formulation withstands temps up to 300 degrees F. 85% gloss.

Carb Renew Bronze Aerosol 5 oz

Carb Renew - Restore the OEM look found on just about any carburetor. Carb Renew is a translucent acrylic enamel that is resistant to fuel and most additives. (Please read and follow label instructions carefully.) While your carburetor is apart and all jets are removed, simply spray Carb Renew on the exterior of the thoroughly cleaned bowl cover and main body. Produces a natural 3-8% gloss. Carb Renew is supplied in a 5 oz. net wt. aerosol can. Enough to cover 2 sq.ft. PRE Painting Prep (10041Z) can be used to clean the carburetor before coating.

Carb Renew Silver Aerosol 5 oz

Carb Renew - Restore the OEM look found on just about any carburetor. Carb Renew is a translucent acrylic enamel that is resistant to fuel and most additives. (Please read and follow label instructions carefully.) While your carburetor is apart and all jets are removed, simply spray Carb Renew on the exterior of the thoroughly cleaned bowl cover and main body. Produces a natural 3-8% gloss. Carb Renew is supplied in a 5 oz. net wt. aerosol can. Enough to cover 2 sq.ft.

Chassis Black Aerosol 15 oz

Not glossy, not dull, just right! Authentic 60-70% gloss looks great on suspension parts and frame. Available in Qts. (covers 40 sq. ft.) and Aerosol (covers 8 sq. ft.). Proper for all makes and models. Tough modified epoxy formulation resists chips,corrosion and temperatures up to 300 degrees F; covers fast, up to four times the coverage of similar size Aer.; average car uses just 3 to 5 cans for entire chassis! (Available in quarts,sprayable only) Works great over bare metal or Eastwood Rust Encapsulator. NOT RECOMMENDED for use over SINGLE STAGE SELF-ETCHING PRIMERS.

Chassis Black Gloss Aerosol 15 oz

Gloss Chassis Black produces an 85% Gloss for a custom look with superior protection. It is specially formulated from a tough modified epoxy base to resist chips, corrosion, and temperatures up to 300 degrees F; covers 8 sq.ft. (up to 4 times faster than similar sized aerosols), average sized car uses just 3 to 5 cans for the entire chassis! Works great over bare metal or Eastwood Rust Encapsulator. NOT RECOMMENDED for use over SINGLE STAGE SELF-ETCHING PRIMERS. Buy 3 or more and save!

Chassis Black Paint Quart

Not glossy, not dull, just right! Authentic 60-70% gloss looks great on suspension parts and frame. Available in Qts. (covers 40 sq. ft.) and Aerosol (covers 8 sq. ft.). Proper for all makes and models. Tough modified epoxy formulation resists chips,corrosion and temperatures up to 300 degrees F; covers fast, up to four times the coverage of similar size Aer.; average car uses just 3 to 5 cans for entire chassis! (Available in quarts,sprayable only) Works great over bare metal or Eastwood Rust Encapsulator. NOT RECOMMENDED for use over SINGLE STAGE SELF-ETCHING PRIMERS. Buy 3 or more and save.

Clear Zinc Aerosol 12 oz

Duplicate Plating with the Ease of an Aerosol Application - Clear Zinc duplicates the exact appearance of Clear Zinc plating. This blue/gray OEM plating was used on a variety of components such as: disc brake dust shields, coil brackets, pulleys, alternator fans, vacuum advance canisters, relays, hose clamps and misc. brackets. Eastwood has duplicated the exact hue in a durable, easily applied aerosol enamel formulation. Resists temperatures up to 300 degrees F. 12 oz net wt. aerosol covers up to 6 sq. ft. 11-15% gloss. PRE Painting Prep (10041Z) removes residual grease and oil for good adhesion.

Cold Galvanizing Compound Aerosol 14 oz

Cold Galvanizing Compound is formulated of 90% Pure Zinc. It chemically fuses to bare steel forming a permanent barrier. Even if scratched, the zinc will deter rust from starting. Acts as a great weld-through coating: ideal for treating the inside surfaces of new replacement body panels which will not be painted, but need superior, long-lasting protection from rust. Not to be used as a primer or painted over. Repairs galvanizing. Buy 3 or more and SAVE!

Detail Gray Paint Aerosol 13 oz

This Detail Paint is specially formulated to duplicate the original look of die cast and stamped steel. Protected up to 250 degrees F by this paint, metal parts will keep that brand new look for a long time. Available in aerosols and quarts. One aerosol covers 6 sq.ft., one quart covers 50 sq.ft., acrylic lacquer, natural low 4-15% gloss. Great on alternator and distributor housings. Buy 3 or more, mix and match, and SAVE!

Detail Gray Paint Quart

This Detail Paint is specially formulated to duplicate the original look of die cast and stamped steel. Protected up to 250 degrees F by this paint, metal parts will keep that brand new look for a long time. Available in aerosols and quarts. One aerosol covers 6 sq.ft., one quart covers 50 sq.ft., acrylic lacquer, natural low 4-15% gloss. Great on alternator and distributor housings. Buy 3 or more, mix and match, and SAVE!

Detail Paint Set 3 Cans

These paints are formulated to protect and duplicate the original look of many metal parts on your car. Detail Gray is used for stamped or machined steel, rough cast aluminum and pot metal. Also for die-cast parts like alternator and distributor housings. Aluma Blast provides protection and durable finish for smooth-cast aluminum components. Spray Gray protects cast iron parts and maintains their fresh cast factory appearance. Protected up to 300 degrees by these paints, metal parts will keep that brand new look for a long time.

Detail Paint Set Of 3 Qrt

These Detail Paints are specially formulated to duplicate the original look of many metal parts on your car. Protected up to 300 degrees by these paints, metal parts will keep that brand new look for a long time. Available in aerosol and quarts (quarts offer the greater value. Thin 10-20% with lacquer thinner or Xylene before spraying). Detail Gray for stamped or machine steel, rough cast aluminum and pot metal; Aluma Blast for smooth cast aluminum components; and Spray Gray protects cast iron parts.

Detail Silver Aerosol 12 oz

This Detail Paint provides the correct 'warm' silver for many wire wheels, including MG, Triumph, Austin Healey and Jaguar. Also, the correct silver for many grills, air cleaner shrouds, valve covers, and virtually any under-hood silver paint finishes. Detail Silver is fast drying, durable and provides excellent coverage. One can coats 6 sq. ft. or up to three wire wheels. 50-60% gloss, Max. temp 250 degrees F. Acrylic Lacquer formulation. 12 oz. net wt. Buy 3 or more and SAVE!

E.W. Diamond Clear Satin Painted Surface 16 oz

You've detail-painted your vehicle's components. Now spend a few moments to protect your work. Detail Clear utilizes a special low-sheen formulation that won't offset the "soft" OEM-like finishes of detail paints. It dries fast and resists fading, chipping, cracking. Compatible with most thoroughly cured enamel and lacquer paints. Buy 3 or more and SAVE!

Exhaust Paint Aluminum Color 10 ozAerosol

Easy-to-apply aerosol formula covers exhaust components from the manifolds or headers back. Great for protecting hangers and tailpipes. An aluminum-colored coating that withstands high temperatures. Not recommended for catalytic converters, manifolds, headers or head pipes. Buy 3 or more and save.

Factory Gray Hi-Temp Coating 11.75oz aerosol

Now the same great 1200 degree performance of our original High Temp Manifold Coating is available in convenient aerosol packaging. Each can is sufficient to coat 2 standard cast iron manifolds or about 6 square feet. 2 cans recommended for header systems.

Factory Gray High Temp Coating Kit

This pint of Factory Gray Coating replicates the look of cast iron on manifolds and headers. Easy brush-on application with the included disposable brushes or sprayable as is using our Pro Portable Sprayer (10387Z) or your jamb gun.

Factory Gray Exhaust Detailing Kit - 1 each of Factory Gray High Temp Coating (34105Z), Exhaust Paint aerosol (10020Z) and a Pack of 3 disposable foam brushes (34152). The pint of High Temp Coating provides enough material to cover one pair of exhaust headers or a few pairs of cast iron manifolds. One aerosol can of Silver Exhaust Paint covers about 6 square feet.

Full Chassis Restoration Kit Gloss Blk

Achieve lasting results with Rust Encapsulator and Chassis Black. Rust Encapsulator is a great rust preventative as well as an excellent primer. Gloss Chassis Black will allow you to correctly paint all of the suspension parts and frame on your project. Proper for all makes and models. It is specially formulated from a tough epoxy base to resist chips, salt and mud corrosion and other forms of road abuse. It's high solids content provides up to 4 times the coverage of similar size aerosols. Works great over bare metal or Rust Encapsulator.

Full Chassis Restoration Kit Red Gloss Blk

Achieve lasting results with Rust Encapsulator and Chassis Black. Rust Encapsulator is a great rust preventative as well as an excellent primer. Gloss Chassis Black will allow you to correctly paint all of the suspension parts and frame on your project. Proper for all makes and models. It is specially formulated from a tough epoxy base to resist chips, salt and mud corrosion and other forms of road abuse. It's high solids content provides up to 4 times the coverage of similar size aerosols. Works great over bare metal or Rust Encapsulator.

Full Chassis Restoration Kit Red Original

Restore your chassis completely with this Restoration Kit. Got rust? Use the Rust Encapsulator. Rust Encapsulator works as an excellent rust preventative as well as a primer for your Chassis Black. The Chassis Black paint will allow you to correctly paint all of the suspension parts and frame on your project. Proper for all makes and models. It looks good and provides tough protection. It is specially formulated from a tough epoxy base to resist chips, salt and mud corrosion, and other forms of road abuse. It's high solids content provides up to 4 times the coverage of similar size aerosols.

Golden Cad Gold Base Step # 1 14 oz

Golden Cad Base - Golden Cad base produces a reflective gold finish ideal as a foundation for replicating Golden Cad. For best results follow with Steps 2 Red Tint (10333Z), and 3 Green Tint (10334Z). Golden Cad Base Coat is a durable enamel formulation. Net wt. 12 oz. Withstands temperatures up to 250 degrees F. Each can covers 6 sq. ft. Gloss 30%. Use Self Etching Primer (16014Z) on clean bare metal for enhanced adhesion and durability.

Golden Cad Kit

Golden Cad - This new acrylic enamel 3-step system has been designed to achieve a more realistic effect than our original Golden Cad System. Withstands temperatures up to 250 degrees F. Produces a natural 30% gloss. Can be used on most parts without expensive replacement or replating. Provides long-lasting protection against corrosion. Includes Gold Base, Red Zinc, and Green Zinc all in 12 oz net wt. aerosol cans (enough to cover 6 sq. ft.). Clear with (10200Z) Diamond Clear Gloss for Bare Metal for better durability.

New Golden Cad System W/Diamond Clear

Golden Cad - This new acrylic enamel 3-step system has been designed to achieve a more realistic effect than our original Golden Cad System. Withstands temperatures up to 250 degrees F. Produces a natural 30% gloss (90% with Diamond Clear Gloss top coat). Can be used on most parts without expensive replacement or replating. Provides long-lasting protection against corrosion. Includes Gold Base, Red Zinc, Green Zinc and a can of (10200Z) Diamond Clear Gloss for Bare Metal for increased shine and durability. 12 oz net wt. aerosol cans (enough to cover 6 sq. ft.).

Original Chassis Black Paint Gallon

Not glossy, not dull, just right! Authentic 60-70% gloss looks great on suspension parts and frame. Proper for all makes and models. Tough modified epoxy formulation resists chips,corrosion and temperatures up to 300 degrees F. Works great over bare metal or Eastwood Rust Encapsulator. NOT RECOMMENDED for use over SINGLE STAGE SELF-ETCHING PRIMERS. Each Gallon covers 160 square feet. Provided in sprayable consistancy. Just stir, strain and spray. Buy 3 or more and save.

Partial Chassis Resto Kit Orginal Black

Do the job right the first time. Use Rust Encapsulator to prevent rust growth. Also works great as a primer. Then paint with Chassis Black. This will paint all the suspension parts and frame on your project correctly. Proper for most makes and models. It's high solids content provides up to 4 times the coverage of similar size aerosols. It is specially formulated from a tough epoxy base to resist chips, salt and mud corrosion and other forms of road abuse!

Partial Chassis Restoration Kit Blk Gloss

Achieve lasting results with Rust Encapsulator and Chassis Black. Rust Encapsulator is a great rust preventative as well as an excellent primer. Gloss Chassis Black will allow you to correctly paint all of the suspension parts and frame on your project. Proper for most makes and models. It is specially formulated from a tough epoxy base to resist chips, salt and mud corrosion and other forms of road abuse. Works great over bare metal or Rust Encapsulator. Includes 2 aer. cans of Gloss Chassis Blk and 1 pint of Black Rust Encapsulator.

Partial Chassis Restoration Kit Red Gloss Blk

Achieve lasting results with Rust Encapsulator and Chassis Black. Rust Encapsulator is a great rust preventative as well as an excellent primer. Gloss Chassis Black will allow you to correctly paint all of the suspension parts and frame on your project. Proper for all makes and models. It is specially formulated from a tough epoxy base to resist chips, salt and mud corrosion and other forms of road abuse. It's high solids content provides up to 4 times the coverage of similar size aerosols. Works great over bare metal or Rust Encapsulator.

Partial Chassis Restoration Kit Red Original

Do the job right the first time. Use Rust Encapsulator to prevent rust growth. Also works great as a primer. Then paint with Chassis Black. This will paint all the suspension parts and frame on your project correctly. Proper for all makes and models. It's high solids content provides up to 4 times the coverage of similar size aerosols. It is specially formulated from a tough epoxy base to resist chips, salt and mud corrosion and other forms of road abuse!

Radiator Black 12 oz Satin Finish

Radiator Black Satin - Many have asked for a lower sheen radiator black. The lower satin sheen resembles the gloss level of modern plastic tank radiators and some imports. Durable Enamel formulation resists temperatures up to 250 degrees F, gas and chipping. One can covers 6 square feet most radiators require 2 cans. Net wt. 12 oz.

Radiator Black Paint Aerosol 12 oz

Standard engine paints are too thick for radiator use because they can interfere with heat transfer and block air flow between the cooling fins. Also, standard paint tends to flake off radiator tanks. Radiator Black helps solve this problem. This acrylic enamel factory-finish (85% gloss) withstands 300 degree F., sprays on thick enough to cover completely, yet thin enough to not interfere with heat transfer. Great for heater cores and air conditioning condensers, too! Each 12 oz net wt. can covers 6 sq. ft., most radiators require 2 cans for full coverage. Buy 3 or more and SAVE!

Silver Cad Aerosol 12 oz

This easy-to-apply, single step aerosol system has been specially formulated to recreate the look of actual silver cadmium plating. Not merely silver paint, Silver Cad faithfully recreates the bluish-silver tint of the original. Perfect for coil clamps, alternator pulleys, carburetor and transmission linkage rods and much, much more! Acrylic lacquer withstands up to 250 degrees Farenheit. Buy 3 or more and SAVE!

Spray Gray Detail Paint Aerosol 12 oz

Spray Gray Detail Paint is specially formulated to duplicate the original look of cast iron parts on your car. Protected up to 250 degrees F by this paint, metal parts on your car will keep that brand new look for a long time. Available in aerosol and quarts. One aerosol covers 6 sq.ft., one quart covers 50 sq.ft., acrylic lacquer, natural low 4-15% gloss. Great on cast iron water pumps, intake manifolds, master cylinders and more. Buy 3 or more, mix and match, and SAVE!

Spray Gray Detail Paint Quart

Spray Gray Detail Paint is specially formulated to duplicate the original look of cast iron parts on your car. Protected up to 250 degrees F by this paint, metal parts on your car will keep that brand new look for a long time. Available in aerosol and quarts. One aerosol covers 6 sq.ft., one quart covers 50 sq.ft., acrylic lacquer, natural low 4-15% gloss. Great on cast iron water pumps, intake manifolds, master cylinders and more. Buy 3 or more, mix and match, and SAVE!

Tank Tone Metallic Coating Aerosol 13 oz

Not to be mistaken for ordinary silver paint, this coating actually contains zinc to protect your gas tank from rust. Many gas tanks came from the factory with a similar coating. For best results, remove all paint and undercoating from the tank before application. Works well over minor surface rust and helps stop its spread. Make your undercarriage detailing truly the best. Two cans are recommended for complete coverage on the average tank. Buy 3 or more and SAVE!

Underhood Black Quart

Underhood Black is the correct shade of black, having just the right 10-20% semigloss finish most car manufacturers used on radiator supports, inner fender walls, lug wrenches, jack bases, underhood brackets, and other parts. Hardware store black paints are either too thick, too glossy, or the wrong color. Just clean, degrease, and prepare the parts well, then spray on for a "factory-like" finish. This acrylic lacquer withstands up to 250 degrees F and goes on thin for a satin smooth finish which does not hide surface details. One quart covers 48 square feet.

Underhood Black Semi Gloss Aerosol 12 oz

Underhood Black is the correct shade of black, having just the right 10-20% semigloss finish most car manufacturers used on radiator supports, inner fender walls, lug wrenches, jack bases, underhood brackets, and other parts. Hardware store black paints are either too thick, too glossy, or the wrong color. Just clean, degrease, and prepare the parts well, then spray on for a "factory-like" finish. This acrylic lacquer withstands up to 250 degrees F and goes on thin for a satin smooth finish which does not hide surface details. One aerosol covers 6 square feet.

Underhood Black Semi-Gloss Gallon

Underhood Black is the correct shade of black, having just the right 10-20% semigloss finish most car manufacturers used on radiator supports, inner fender walls, lug wrenches, jack bases, underhood brackets, and other parts. Hardware store black paints are either too thick, too glossy, or the wrong color. Just clean, degrease, and prepare the parts well, then spray on for a "factory-like" finish. This acrylic lacquer withstands up to 250 degrees F and goes on thin for a satin smooth finish which does not hide surface details. One gallon covers 192 square feet. Thin 100-150% w/lacquer thinner or Xylene for spraying.

Underhood Detailing Kit

Dingy inner fenders and castings really detract from underhood appearance. This assortment of our popular aerosol finishes will help detail most engine compartments. Set includes 2 cans of Underhood Black (10024Z) aerosol, and one aerosol can of each of the following: Detail Gray (10036Z), Aluma Blast (10109Z), Spray Gray (10032Z), Silver Cad (10022Z), and a can of PRE Painting Prep (10041Z) at a savings over individual pricing.

Eastwood Rust Encapsulator Aerosol Red 16 oz

NEW Eastwood Rust Encapsulator has been tested by an independent lab to be the most effective rust preventive product yet. Tested against well-known brands, the New Eastwood Rust Encapsulator has proven to be superior in sunlight resistance, preventing rust creep, and overall durability. One 16 oz. net wt. aerosol covers about 10 sq. ft. Contains no isocyanates. Heat resistant up to 400³ F. Made in the USA. Buy 3 or more and save.

Eastwood Rust Encapsulator Black - Pint

Eastwood Rust Encapsulator has been tested by an independent lab to be the most effective rust preventive product yet. Tested against well-known brands, the Eastwood Rust Encapsulator has proven to be superior in sunlight resistance, preventing rust creep, and overall durability. One pint covers about 25 sq. ft. with a double coat. Can be thinned up to 20% with lacquer thinner for spraying. Contains no isocyanates. Heat resistant up to 400 degrees F. Made in the USA.

Eastwood Rust Encapsulator Black - Quart

Eastwood Rust Encapsulator has been tested by an independent lab to be the most effective rust preventive product yet. Tested against well-known brands, the Eastwood Rust Encapsulator has proven to be superior in sunlight resistance, preventing rust creep, and overall durability. One quart covers about 50 sq. ft. with a double coat. Can be thinned up to 20% with lacquer thinner for spraying. Contains no isocyanates. Heat resistant up to 400³ F. Made in the USA. Buy 3 or more and save.

Eastwood Rust Encapsulator Black Aerosol 16 ounce

Eastwood Rust Encapsulator has been tested by an independent lab to be the most effective rust preventive product yet. Tested against well-known brands, the Eastwood Rust Encapsulator has proven to be superior in sunlight resistance, preventing rust creep, and overall durability. One 16 oz. net wt. aerosol covers about 10 sq. ft. Contains no isocyanates. Heat resistant up to 400³ F. Made in the USA. Buy 3 or more and SAVE over individual pricing.

Eastwood Rust Encapsulator Black Gallon

Eastwood Rust Encapsulator has been tested by an independent lab to be the most effective rust preventive product yet. Tested against well-known brands, the Eastwood Rust Encapsulator has proven to be superior in sunlight resistance, preventing rust creep, and overall durability. One gallon covers about 200 sq. ft. with a double coat. Contains no isocyanates. Heat resistant up to 400³ F. Made in the USA.

Eastwood Rust Encapsulator Red 1 pt

NEW Eastwood Rust Encapsulator has been tested by an independent lab to be the most effective rust preventive product yet. Tested against well-known brands, the New Eastwood Rust Encapsulator has proven to be superior in sunlight resistance, preventing rust creep, and overall durability. One pint covers about 25 sq. ft. with a double coat. Can be thinned up to 20% with lacquer thinner for spraying. Contains no isocyanates. Heat resistant up to 400³ F. Made in the USA. Buy 3 or more and save.

Eastwood Rust Encapsulator Red 1 qt

Eastwood Rust Encapsulator has been tested by an independent lab to be the most effective rust preventive product yet. Tested against well-known brands, the Eastwood Rust Encapsulator has proven to be superior in sunlight resistance, preventing rust creep, and overall durability. One quart covers about 50 sq. ft. with a double coat. Can be thinned up to 20% with lacquer thinner for spraying. Contains no isocyanates. Heat resistant up to 400³ F. Made in the USA.

Eastwood Rust Encapsulator Red Gallon

Eastwood Rust Encapsulator has been tested by an independent lab to be the most effective rust preventive product yet. Tested against well-known brands, the Eastwood Rust Encapsulator has proven to be superior in sunlight resistance, preventing rust creep, and overall durability. One gallon covers about 200 sq. ft. with a double coat. Contains no isocyanates. Heat resistant up to 400 F. Made in the USA. Use the (13215) Stainless Steel Wire Brush to remove loose rust.

Eastwood Rust Encapsulator Silver 128oz (Gallon)

Eastwood Rust Encapsulator has been tested by an independent lab to be the most effective rust preventive product yet. Tested against well-known brands, the Eastwood Rust Encapsulator has proven to be superior in sunlight resistance, preventing rust creep, and overall durability. One gallon covers about 200 sq. ft. with a double coat. Contains no isocyanates. Heat resistant up to 400 F. Made in the USA. Use the (13215) Stainless Steel Wire Brush to remove loose rust.

Eastwood Rust Encapsulator Silver 32 oz

Low 3-5% gloss Silver Rust Encapsulator is as easy to apply and durable as our popular Red and Black. Perfect under metallic and gray finishes. Covers about 50 square feet with a double coat.