Re: [FWDLK] Spark Plug Wires 958 Imperial
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] Spark Plug Wires 958 Imperial



On 6/15/2018 7:03 PM, Jim Affholder wrote:
Anyone know a source for original spark plug wires for 1958 Imperial

Jim


the original wire set was solid core I believe, the packard 440
wire sold at NAPA is still solid core and the correct diameter to
fit the bakelite boots.

As far as I recall, (60s and 70s) replacement wire sets DID not
come complete ready to use.  the user needed to salvage the
bakelite boots and reuse them on the new wire set. SO the
wire set needed the terminal crimped on after sliding the
boot on the new wire.

I DO have an OEM original 1957 set of EIght (8) wires to get
the proper lengths for the plugs, just don't have the correct
length for the coil wire.


--
Paul Holmgren
Music hits of Yesteryear
Paul Simon --- Fifty Ways to Lose Your Liver
The Commodores --- Once, Twice, Three Times to the Bathroom
Marvin Gaye's --- Heard It Through the Grape Nuts

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

Help the Forward Look with every eBay purchase by starting your search here:
http://www.ForwardLook.net/eBay

Help the Forward Look with every Amazon purchase by clicking here:
http://www.ForwardLook.net/Amazon



Home Back to the Home of the Forward Look Network


Copyright 2018 The Forward Look Network.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.