Sat. 9/12/15
2:30pm PST
FLML,
Can someone tell me the correct/best routing of the 56 Ply 4dr. Sedan front
door switch wiring that feeds/connect to the dome light housing?
I pulled all my old wiring out years ago and have no reference but it
appears there are two options:
1) Feed front door switch wiring DOWN to floorboard and route under alum.
scuff plates and then up inside each respective door pillar (or on the outside
where wires will be covered by the pillar facia plates) to the roof and onto the
dome light switch; or...
2) Feed front door switch wiring UP and inside the front A-pillars and then
out to run along the top of the roof rail shell avoiding being pinched by
headliner installation.
Thank you for any help!
Gary Pavlovich
56 Plymouth 4dr. Sedan
390” Poly