I’m not sure how much this will help, but I think they are 13/16” socket
size, with a 9/16” hole. But two things I am more sure about: The lugs on the
right side are left hand thread, and the ones on the left side are right hand
threads; and the front are bolts, into holes and the rear are nuts, screwed over
studs.
I think it was the signs of Chrysler Corp having all the best and most
safety and performance character traits of the generation. I remember when
Chrysler introduced it’s Electronic Ignition, ahead on GM. I know the Pontiac
had a form of electronics, but Chrysler made it for the full line. Chrysler’s
“Alternators” were also a sign of the ingenuity shown by the engineers.
The basic idea for the lug bolts & nuts was to “force the bolts &
nuts to tighten, or keep tight, the nuts or bolts on each side of the cars”. The
idea came from overzealous engineers that time, but all of the Chrysler brands
would brag about the “extra safety”.
fun times!
mike higgins
Sent: Monday, March 24, 2014 4:36 PM
Subject: [FWDLK] lug nuts 1956 Mopar?