Re: [FWDLK] transmission cable leak

[Gary Nelson <gnelson@xxxxxxxxxxxx>]



Here's a quick fix that may be long term. Remove all the old cover and slide on shrink tube. Any electronics store should have what you need. I bought a 3' x 1" before. You want the ID to be just slightly bigger than the end fitting on the cable. Slide shrink tube over cable exposing the cable end. Clean the end and apply thin coat of silicon. Slide shrink tube back over the cable end where original ended and shrink it onto the cable with heat gun or hair dryer.

I have not tried as of now. It was my plan to do so. If you try it let us all know how it worked.

 

Thank you,
Gary, the parts doc
Escondido, CA  USA
Land of the Avocado
Mail: garythepartsdoc@xxxxxxxxxxxx
760.751.1958

 

 

 

-----Original Message-----
From: Forward Look Mopar Discussion List [mailto:L-FORWARDLOOK@xxxxxxxxxxxxx]On Behalf Of Roger van Hoy
Sent: Saturday, July 06, 2013 10:34 PM
To: L-FORWARDLOOK@xxxxxxxxxxxxx
Subject: [FWDLK] transmission cable leak

Is there a quick fix for a PowerFlite cable leak at the transmission?  Was thinking maybe peel back the cover, coat the housing with silicone, replace the cover and clamp it.  Or should I just bite the bullet and replace the cable?

 

--Roger van Hoy

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

Help The Forward Look with every Amazon purchase by clicking here!
Help the Forward Look with every eBay purchase by starting your search here!

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

Help The Forward Look with every Amazon purchase by clicking here!
Help the Forward Look with every eBay purchase by starting your search here!