Here in Idaho, I use a local shop called Window Welder and they do a great job. If the rubber is not torn up taking the old window out, it should be fine. Gary Nelson in CA sells an excellent rubber softener that I have used on numerous old rubbers and have yet found a need to buy new rubber for several 56 though 59 mopars. Let me know if you need Gary's contact info.
George
On May 29, 2013, at 10:00 PM, L-FORWARDLOOK automatic digest system <LISTSERV@xxxxxxxxxxxxx> wrote:
> There are 7 messages totaling 1329 lines in this issue.
>
> Topics of the day:
>
> 1. 1956 Dodge windshield (6)
> 2. ISO- Plymouth Project
>
> *************************************************************
>
> To unsubscribe or set your subscription options, please go to
> http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
>
> Help the Forward Look with every eBay purchase by starting your search here:
> http://www.ForwardLook.net/eBay
>
>
>>>> Error in line 20 of l-forwardlook.mailtpl: unknown formatting command <<<
> -> ...and with every Amazon purchase by clicking here: <-
>
>
> ----------------------------------------------------------------------
>
> Date: Wed, 29 May 2013 11:56:51 -0500
> From: debenson2 <debensonii@xxxxxxxxxxx>
> Subject: 1956 Dodge windshield
>
> I just bought a 1956 Dodge CRL that is beautiful is a little street rodded
> it has a 440 and a torque flite a Volare front end it is real nice, as soon
> as it gets here I will post photographs for anyone who would like to see it.
>
>
>
> I have one issue with it however and am looking for some advice.
>
> The windshield has a small crack in it now I have a new one on order it
> should be here next week.
>
> I am having difficulty locating someone to replace it.
>
> AND wondering if reusing the old gasket is ok or should I go ahead and order
> one from Andy Bernbaum's?
>
> And if anyone in Minnesota knows of a vendor for the replacement?
>
> I do not think a place like Safelite can do this job..
>
> debenson2
>
> 763/438/6671
>
>
> *************************************************************
>
> To unsubscribe or set your subscription options, please go to
> http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
>
> Help the Forward Look with every eBay purchase by starting your search here:
> http://www.ForwardLook.net/eBay
>
>
>>>> Error in line 20 of l-forwardlook.mailtpl: unknown formatting command <<<
> -> ...and with every Amazon purchase by clicking here: <-
>
> ------------------------------
>
> Date: Wed, 29 May 2013 15:22:39 -0400
> From: Adam Lindenbaum <adaml57@xxxxxxx>
> Subject: Re: 1956 Dodge windshield
>
> If the gasket is soft you can reuse it and I'd recommend it over a reproduction one but it's always good to buy one and bring it along just in case they need it.
> Some chain glass shops have very talented help. our local Triumph Glass (owned by Safelite) had a really good manager who did all of the specialty work and he was great, he cut glass for chopped cars,installed the windshield in my friend's '59 Fury, ect. He moved to Florida and now the place is a butcher shop, old and new cars. Ask around, the best glass guys for old cars (pre-urethane) are guys in their 50's. There are still some good old glass guys out there. If you were in Southeastern NY or Northeast PA I could hook you up with 2 great glass guys.
>
> Good Luck,
> Adam Lindenbaum
>
>
>
>
>
> -----Original Message-----
> From: debenson2 <debensonii@xxxxxxxxxxx>
> To: L-FORWARDLOOK <L-FORWARDLOOK@xxxxxxxxxxxxx>
> Sent: Wed, May 29, 2013 12:57 pm
> Subject: [FWDLK] 1956 Dodge windshield
>
>
>
> I just bought a 1956 Dodge CRL that is beautiful is a little street rodded it has a 440 and a torque flite a Volare front end it is real nice, as soon as it gets here I will post photographs for anyone who would like to see it.
>
> I have one issue with it however and am looking for some advice.
> The windshield has a small crack in it now I have a new one on order it should be here next week.
> I am having difficulty locating someone to replace it.
> AND wondering if reusing the old gasket is ok or should I go ahead and order one from Andy Bernbaum's?
> And if anyone in Minnesota knows of a vendor for the replacement?
> I do not think a place like Safelite can do this job….
> debenson2
> 763/438/6671
>
>
> *************************************************************
> To unsubscribe or set your subscription options,please go to
> http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
> Help The Forward Look with every Amazon purchase by clicking here!
> Help the Forward Look with every eBay purchase by starting your search here!
>
>
> *************************************************************
>
> To unsubscribe or set your subscription options, please go to
> http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
>
> Help the Forward Look with every eBay purchase by starting your search here:
> http://www.ForwardLook.net/eBay
>
>
>>>> Error in line 20 of l-forwardlook.mailtpl: unknown formatting command <<<
> -> ...and with every Amazon purchase by clicking here: <-
>
> ------------------------------
>
> Date: Wed, 29 May 2013 15:34:53 -0400
> From: Bjwt 56 <Bjwt56@xxxxxxx>
> Subject: Re: 1956 Dodge windshield
>
> I reused the rear glass for my 56 Fury with a new gasket from Steele and
> screwed it up. I cut the gasket too short. I got a new gasket and took the
> car to the local PPG auto glass shop and they took out my sloppy job and
> put the new gasket with glass in. I had some water leaks later, but fixed
> that with window silicone sealant.
>
> Auto glass is really a two man job.
>
> John Teske
>
>
> In a message dated 5/29/2013 3:22:53 P.M. Eastern Daylight Time,
> adaml57@xxxxxxx writes:
>
> If the gasket is soft you can reuse it and I'd recommend it over a
> reproduction one but it's always good to buy one and bring it along just in case
> they need it.
> Some chain glass shops have very talented help. our local Triumph Glass
> (owned by Safelite) had a really good manager who did all of the specialty
> work and he was great, he cut glass for chopped cars,installed the windshield
> in my friend's '59 Fury, ect. He moved to Florida and now the place is a
> butcher shop, old and new cars. Ask around, the best glass guys for old cars
> (pre-urethane) are guys in their 50's. There are still some good old glass
> guys out there. If you were in Southeastern NY or Northeast PA I could
> hook you up with 2 great glass guys.
> Good Luck,
> Adam Lindenbaum
>
>
>
>
>
> -----Original Message-----
> From: debenson2 <debensonii@xxxxxxxxxxx>
> To: L-FORWARDLOOK <L-FORWARDLOOK@xxxxxxxxxxxxx>
> Sent: Wed, May 29, 2013 12:57 pm
> Subject: [FWDLK] 1956 Dodge windshield
>
>
>
>
> I just bought a 1956 Dodge CRL that is beautiful is a little street rodded
> it has a 440 and a torque flite a Volare front end it is real nice, as
> soon as it gets here I will post photographs for anyone who would like to see
> it.
>
> I have one issue with it however and am looking for some advice.
> The windshield has a small crack in it now I have a new one on order it
> should be here next week.
> I am having difficulty locating someone to replace it.
> AND wondering if reusing the old gasket is ok or should I go ahead and
> order one from Andy Bernbaum's?
> And if anyone in Minnesota knows of a vendor for the replacement?
> I do not think a place like Safelite can do this job….
> debenson2
> 763/438/6671
>
>
>
> *************************************************************
> To unsubscribe or set your subscription options, please go to
> _http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1_
> (http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1)
> _Help The Forward Look with every Amazon purchase by clicking here!_
> (http://www.amazon.com/?_encoding=UTF8&TAG=theforwardloo-20&LINKCODE=ur2&CAMP=1789
> &CREATIVE=9325)
> _Help the Forward Look with every eBay purchase by starting your search
> here!_ (http://www.forwardlook.net/ebay)
>
>
> *************************************************************
> To unsubscribe or set your subscription options, please go to
> http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
> _Help The Forward Look with every Amazon purchase by clicking here!_
> (http://www.amazon.com/?_encoding=UTF8&TAG=theforwardloo-20&LINKCODE=ur2&CAMP=1789
> &CREATIVE=9325)
> _Help the Forward Look with every eBay purchase by starting your search
> here!_ (http://www.forwardlook.net/ebay)
>
> *************************************************************
>
> To unsubscribe or set your subscription options, please go to
> http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
>
> Help the Forward Look with every eBay purchase by starting your search here:
> http://www.ForwardLook.net/eBay
>
>
>>>> Error in line 20 of l-forwardlook.mailtpl: unknown formatting command <<<
> -> ...and with every Amazon purchase by clicking here: <-
>
> ------------------------------
>
> Date: Wed, 29 May 2013 16:25:24 -0700
> From: Jesse <ks_cowboy_86@xxxxxxxxx>
> Subject: ISO- Plymouth Project
>
> Hi everyone my name is Jesse Tollett. I just got home from the military last September and I am looking for a good project. I would really like to find a 1957 or 1958 2 or 4 door hardtop. I need something that can be restored and not completely gutted and rotted. I am looking for a car that is in the Kansas area, surrounding states are a possibility if I can get a good deal on a long travel. I deal in cash and cash only! Who doesn't like that? Thank you all! My number is 620-481-3689. My email is ks_cowboy_86@xxxxxxxxxx Please send pics if you can and a very good description. Again Thank you!
>
> *************************************************************
>
> To unsubscribe or set your subscription options, please go to
> http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
>
> Help the Forward Look with every eBay purchase by starting your search here:
> http://www.ForwardLook.net/eBay
>
>
>>>> Error in line 20 of l-forwardlook.mailtpl: unknown formatting command <<<
> -> ...and with every Amazon purchase by clicking here: <-
>
> ------------------------------
>
> Date: Wed, 29 May 2013 18:36:48 -0500
> From: Tim Bowers <stellarrestorations@xxxxxxxxx>
> Subject: Re: 1956 Dodge windshield
>
> My advice is to make every effort to save and re-use the original gasket.
>
> From experience a couple of years ago, the Bernbaum gaskets will be a waste
> of time and money.
>
> Tim Bowers
> Stellar Antique Auto Restorations
>
>
>
>
>
> On Wed, May 29, 2013 at 11:56 AM, debenson2 <debensonii@xxxxxxxxxxx> wrote:
>
>> I just bought a 1956 Dodge CRL that is beautiful is a little street rodded
>> it has a 440 and a torque flite a Volare front end it is real nice, as soon
>> as it gets here I will post photographs for anyone who would like to see it.
>> ****
>>
>> ** **
>>
>> I have one issue with it however and am looking for some advice.****
>>
>> The windshield has a small crack in it now I have a new one on order it
>> should be here next week.****
>>
>> I am having difficulty locating someone to replace it.****
>>
>> AND wondering if reusing the old gasket is ok or should I go ahead and
>> order one from Andy Bernbaum's?****
>>
>> And if anyone in Minnesota knows of a vendor for the replacement?****
>>
>> I do not think a place like Safelite can do this job….****
>>
>> debenson2****
>>
>> 763/438/6671****
>>
>> *************************************************************
>>
>> To unsubscribe or set your subscription options, please go to
>> http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1<http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1>
>>
>> Help The Forward Look with every Amazon purchase by clicking here!<http://www.amazon.com/?_encoding=UTF8&TAG=theforwardloo-20&LINKCODE=ur2&CAMP=1789&CREATIVE=9325>
>> Help the Forward Look with every eBay purchase by starting your search
>> here! <http://www.ForwardLook.net/ebay>
>>
>
> *************************************************************
>
> To unsubscribe or set your subscription options, please go to
> http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
>
> Help the Forward Look with every eBay purchase by starting your search here:
> http://www.ForwardLook.net/eBay
>
>
>>>> Error in line 20 of l-forwardlook.mailtpl: unknown formatting command <<<
> -> ...and with every Amazon purchase by clicking here: <-
>
> ------------------------------
>
> Date: Wed, 29 May 2013 20:07:57 -0400
> From: Adam Lindenbaum <AdamL57@xxxxxxx>
> Subject: Re: 1956 Dodge windshield
>
> My '57 Plymouth has original gaskets, my '58 Fury has Bernbaums front and
> rear. The Originals are better but Bernbaums work just fine and are a decent
> replacement
> Adam Lindenbaum
>
> In a message dated 5/29/2013 7:36:58 P.M. Eastern Daylight Time,
> stellarrestorations@xxxxxxxxx writes:
>
>
>
>
> My advice is to make every effort to save and re-use the original gasket.
>
>
> From experience a couple of years ago, the Bernbaum gaskets will be a
> waste of time and money.
>
>
> Tim Bowers
>
> Stellar Antique Auto Restorations
>
>
>
>
>
>
>
>
>
>
>
> On Wed, May 29, 2013 at 11:56 AM, debenson2 <_debensonii@xxxxxxxxxxxx
> (mailto:debensonii@xxxxxxxxxxx) > wrote:
>
>
>
> I just bought a 1956 Dodge CRL that is beautiful is a little street rodded
> it has a 440 and a torque flite a Volare front end it is real nice, as
> soon as it gets here I will post photographs for anyone who would like to see
> it.
> I have one issue with it however and am looking for some advice.
> The windshield has a small crack in it now I have a new one on order it
> should be here next week.
> I am having difficulty locating someone to replace it.
> AND wondering if reusing the old gasket is ok or should I go ahead and
> order one from Andy Bernbaum's?
> And if anyone in Minnesota knows of a vendor for the replacement?
> I do not think a place like Safelite can do this job….
> debenson2
> _763/438/6671_ (tel:763/438/6671)
>
> *************************************************************
> To unsubscribe or set your subscription options, please go to
> _http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1_
> (http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1)
> _Help The Forward Look with every Amazon purchase by clicking here!_
> (http://www.amazon.com/?_encoding=UTF8&TAG=theforwardloo-20&LINKCODE=ur2&CAMP=1789
> &CREATIVE=9325)
> _Help the Forward Look with every eBay purchase by starting your search
> here!_ (http://www.forwardlook.net/ebay)
>
>
>
> *************************************************************
> To unsubscribe or set your subscription options, please go to
> http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
> _Help The Forward Look with every Amazon purchase by clicking here!_
> (http://www.amazon.com/?_encoding=UTF8&TAG=theforwardloo-20&LINKCODE=ur2&CAMP=1789
> &CREATIVE=9325)
> _Help the Forward Look with every eBay purchase by starting your search
> here!_ (http://www.forwardlook.net/ebay)
>
> *************************************************************
>
> To unsubscribe or set your subscription options, please go to
> http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
>
> Help the Forward Look with every eBay purchase by starting your search here:
> http://www.ForwardLook.net/eBay
>
>
>>>> Error in line 20 of l-forwardlook.mailtpl: unknown formatting command <<<
> -> ...and with every Amazon purchase by clicking here: <-
>
> ------------------------------
>
> Date: Wed, 29 May 2013 22:49:25 -0400
> From: Nick Sperduto <drt-rdr@xxxxxxxxxxx>
> Subject: Re: 1956 Dodge windshield
>
> I have a bernbaum gasket in my 56 Plymouth. It's been in there since about
> 1993. I get a slight drip in a heavy rain in the center of the windshield. I
> never really looked to see why. I don't actually drive in enough rain for it
> to bother me.
>
>
>
> From: Forward Look Mopar Discussion List
> [mailto:L-FORWARDLOOK@xxxxxxxxxxxxx] On Behalf Of debenson2
> Sent: Wednesday, May 29, 2013 12:57 PM
> To: L-FORWARDLOOK@xxxxxxxxxxxxx
> Subject: [FWDLK] 1956 Dodge windshield
>
>
>
> I just bought a 1956 Dodge CRL that is beautiful is a little street rodded
> it has a 440 and a torque flite a Volare front end it is real nice, as soon
> as it gets here I will post photographs for anyone who would like to see it.
>
>
>
> I have one issue with it however and am looking for some advice.
>
> The windshield has a small crack in it now I have a new one on order it
> should be here next week.
>
> I am having difficulty locating someone to replace it.
>
> AND wondering if reusing the old gasket is ok or should I go ahead and order
> one from Andy Bernbaum's?
>
> And if anyone in Minnesota knows of a vendor for the replacement?
>
> I do not think a place like Safelite can do this job..
>
> debenson2
>
> 763/438/6671
>
> *************************************************************
>
> To unsubscribe or set your subscription options, please go to
> http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook
> <http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1> &A=1
>
> Help The Forward Look with every Amazon purchase by clicking here!
> <http://www.amazon.com/?_encoding=UTF8&TAG=theforwardloo-20&LINKCODE=ur2&CAM
> P=1789&CREATIVE=9325>
> Help the Forward Look with every eBay purchase by starting your search here!
> <http://www.ForwardLook.net/ebay>
>
>
> *************************************************************
>
> To unsubscribe or set your subscription options, please go to
> http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
>
> Help the Forward Look with every eBay purchase by starting your search here:
> http://www.ForwardLook.net/eBay
>
>
>>>> Error in line 20 of l-forwardlook.mailtpl: unknown formatting command <<<
> -> ...and with every Amazon purchase by clicking here: <-
>
> ------------------------------
>
> End of L-FORWARDLOOK Digest - 28 May 2013 to 29 May 2013 (#2013-71)
> *******************************************************************
*************************************************************
To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
Help the Forward Look with every eBay purchase by starting your search here:
http://www.ForwardLook.net/eBay
>>> Error in line 20 of l-forwardlook.mailtpl: unknown formatting command <<<
-> ...and with every Amazon purchase by clicking here: <-
|
|
Back to the Home of the Forward Look Network