Re: [FWDLK] Newbie

[Eastern Sierra Adjustment Svc <esierraadj@xxxxxxxxxxx>]

LOL----the Dark Side is putting in a 440 or a SBC, NOT
merely a couple OEM-aftermarket/vintage-era hop-
ups that could have been done, back in the 'day' !!!


lolol

Hey---a conversation;
about time!

Neil




On 4/21/2013 1:27 PM, Adam Lindenbaum wrote:
> Wow Neil, have you come over to the "Dark Side"? It's the first time I've
> ever seen anyone other than a select few of us recommend hot rodding to
> another  member. Welcome aboard David, and welcome to the Dark Side Neil!
> Adam Lindenbaum
> P.S. If you're going to hot rod it go all out and put a Hemi in it!
>   
> In a message dated 4/21/2013 2:15:39 P.M. Eastern Daylight Time,
> esierraadj@xxxxxxxxxxx writes:
>
> Welcome  aboard, David!
>
> This message board has been quiet (...too quiet) for a  while now.
>
>
> Ask-away; have you thought about hot-rodding it, with  dual
> 1-bbl carbs, a cam, and dual exhaust pipes with  glass-paks?
>
>
> Neil Vedder
>
>
> On 4/21/2013 10:20 AM, David F.  Darby wrote:
> > Hello,
> >
> > New list member David Darby here  from Missouri (USA). I have no idea how
> > many members are here or how  active the list is, but I'm glad to have
> found
> > it.
> >
> > I  presently have a P26 1955 Plymouth Savoy. It's a bone-stock four-door
> >   flathead 6 with Powerflite trans. I've owned it for several years, but
> >   haven't done too much with it as it has had to wait for completion of an
>   MG
> > saloon (another serious addiction). I am now treating with the  Savoy and
> > hope to get it back on the road soon.
> >
> > I have  it running and I just restored the steering wheel, horn ring, and
> > turn  indicator switch. I've gathered up hydraulics parts and will spend
> the
> >   next week or two rebuilding the brakes. After that, new tires should get
>   it
> > past its safety inspection and back on the road.
> >
> >   Anyhoo, I'll be here listening, asking (possibly dumb) questions, and
> will
> > try to contribute what I can.
> >
> >   Best,
> >
> > David Darby
> >
> >   *************************************************************
> >
> >   To unsubscribe or set your subscription options, please go to
> >   http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
> >
> >   Help the Forward Look with every eBay purchase by starting your search
> here:
> >   http://www.ForwardLook.net/eBay
> >
> >
> > > > > Error in  line 20 of l-forwardlook.mailtpl: unknown formatting command
>   <<<
> >    -> ...and with every Amazon purchase by  clicking here:  <-
> *************************************************************
>
> To  unsubscribe or set your subscription options, please go  to
> http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
>
> Help  the Forward Look with every eBay purchase by starting your search
> here:
> http://www.ForwardLook.net/eBay
>
>
> > > > Error in line  20 of l-forwardlook.mailtpl: unknown formatting command
> <<<
> ->  ...and with every Amazon purchase by clicking here:  <-
>
>
> *************************************************************
>
> To unsubscribe or set your subscription options, please go to
> http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
>
> Help the Forward Look with every eBay purchase by starting your search here:
> http://www.ForwardLook.net/eBay
>
>
> > > > Error in line 20 of l-forwardlook.mailtpl: unknown formatting command <<<
>   -> ...and with every Amazon purchase by clicking here: <-

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

Help the Forward Look with every eBay purchase by starting your search here:
http://www.ForwardLook.net/eBay


> > > Error in line 20 of l-forwardlook.mailtpl: unknown formatting command <<<
-> ...and with every Amazon purchase by clicking here: <-