Re: [FWDLK] Valve cover gaskets
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] Valve cover gaskets



If these are good quality rubber gaskets you should not need any sealer. Just make sure both surfaces are super clean, the edges of the valve cover and mounting holes are not bent,and wipe down the gaskets with ru glide or something similar. Do not over tighten! Dick

Sent: Sunday, August 12, 2012 12:47 PM
Subject: [FWDLK] Valve cover gaskets

Hey folks, looking for some advice.

Going to be putting some new valve cover gaskets on a poly 318, since these gaskets are rubber and not cork, are you guys putting them on dry or are you using some sealer. If you're using sealer, what kind?

Should I put a bead or rtv black or copper on them?

 

Thanks,

Nick

No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.2178 / Virus Database: 2437/5195 - Release Date: 08/12/12

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

Help The Forward Look with every Amazon purchase by clicking here!
Help the Forward Look with every eBay purchase by starting your search here!

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

Help The Forward Look with every Amazon purchase by clicking here!
Help the Forward Look with every eBay purchase by starting your search here!




Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.