Re: [FWDLK] Chrysler manual trannie info, please.
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] Chrysler manual trannie info, please.



  I love sexy talk like this.  :-)

  You would have loved my stick / rammie DeSoto !

  Burger

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%


On Feb 28, 2012, at 11:02 AM, Eastern Sierra Adjustment Svc wrote:

> Thanks; looks like the 2.31/1.55 was used in the 57 Dodges,
> series, too.
> 
> The 57 6-cylinder Coronet series had 2.50/1.68 gears in them.
> 
> According to the 5/57 Hot Rod, all 57 PLY's, including Furys,
> had the 2.50/1.68 gears in them, as well.
> 
> In 1958, the Fury's (anyway) got the 2.31/1.55 trannies, according
> to the 1/58 Hot Rod.
> 
> Looks like the 2.31 guy is 1738 232 on our 'score cards'.
> 
> In 61, the Dodge's gearing was 2.55/1.49, still with a non-synchro
> 1st gear and that trannie was N/A on the Rammie engines (according
> to the A.M.A. Spec Sheets), but Hot Rod & Motor Life tested a red
> Seneca Rammie sedan that had this manual trannie in it, and their
> only complaints with it were that, on the column shift, 2nd gear was a
> knuckle-buster on the dash's heater pushbuttons (optional Hurst
> floor shifter was recommended) , and that the 1.49 2nd gear's ratio
> jump was "too much", for the shift into the 1.00 3rd gear, with the 4.10
> gears that the car was running, because the engine would only be winding
> out to 5,000 RPM at the end of the 1/4 mile.
> 
> Does anyone have a 1961 Parts book, to check the P/N on this trannie?
> 
> 
> Neil Vedder
> 
> 
> 
> The On 2/28/2012 6:26 AM, Wayne Graefen wrote:
>> All '57 Chrysler manual transmission (Windsor and 300C)
>> 
>> Transmission gear ratios:
>> First  2.31
>> Second 1.55
>> Third 1.00
>> Reverse 2.96
>> 
>> 
>> Please note: If you forward this email please delete the forwarding history, which includes my email address. It is a courtesy to me and others who may not wish to have their email addresses sent all over the world! Erasing the history helps prevent Spammers from mining addresses and viruses.
>>   ----- Original Message -----
>>   From: Eastern Sierra Adjustment Svc
>>   Sent: Monday, February 27, 2012 5:09 PM
>>   Subject: Chrysler manual trannie info, please.
>> 
>> 
>>   For anyone with access to the 55-61 A.M.A. Specifications Sheets on
>>   the 300's, could you kindly inform me what the 1st&  2nd gear ratios
>>   were on the 3-speed sticks?
>> 
>>   Thanks,
>> 
>>   Neil Vedder
>> 
>>   *************************************************************
>> 
>>   To unsubscribe or set your subscription options, please go to
>>   http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
>> 
> 
> *************************************************************
> 
> To unsubscribe or set your subscription options, please go to
> http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.