It should fit, the differences in the early and late poly's is the crank
and bore and stroke.
Adam
In a message dated 1/29/2012 2:18:04 P.M. Eastern Standard Time,
drt-rdr@xxxxxxxxxxx writes:
Anyone see a problem
using a 277 exhaust manifold on a 64 poly 318?
Nick
Sent from
my Verizon Wireless 4G LTE
Phone
-----Original message-----
From: Eastern
Sierra Adjustment Svc <esierraadj@xxxxxxxxxxx> To:
L-FORWARDLOOK@xxxxxxxxxxxxx Sent: Sun, Jan 29, 2012 19:12:41
GMT+00:00 Subject: Re: [FWDLK] PARTS FOR US,,,care of
chebbies!!
ED, can you post up some images of these parts, or
PM me with their page jay-pegs, & I'll post them here, for
you.
Neil Vedder
On 1/29/2012 6:10 AM,
eddee@xxxxxxxxxxxxx wrote: > HELLO MEMBERS!! > > Just
passing along something that I came across > > CORVETTE
CENTRAL------in looking thru their ctalog,,there are some NEW > PARTS
that we can use for our mopars!! > NOT CHEAP!!-but new
!! > >
------------------------------------------------------------------------------------------------------------------------------------------
> > > ANTISTAT CAPACITORS for generator,,,voltage regulator
and coil!!-- > almost identical to ours > OIL FILLER TUBE
CAPS--IDENTICAL!! > BALLAST RESISTERS--almost identical to
ours > > HAVE FUN > ED ECKERSON > LI
NY > >
************************************************************* > >
To unsubscribe or set your subscription options, please go to > http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1 >
*************************************************************
To
unsubscribe or set your subscription options, please go to http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
*************************************************************
To unsubscribe or set your subscription options,
please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1 |