I
have been up to my ass in work and ignoring this thread until now. My
experience with powder coating has been negative. It can and will
"undermine" like rust does under paint. And when it does, it peels off
large. There is no "touch up" repair option with powder coating, and the
only way to remove the remaining PC material is a serious sandblasting and
attendant refinishing of the surface to then proceed to try PC again or go
back to paint.
After going down this road a couple times, I am done with
powder coating. Paint is durable, how it was done OEM, and maintenance /
repair is a simple process. PC is a PITA if you have to redo it.
B.
From: "Glenn Barratt" <FURY@xxxxxxxxxx>
To:
L-FORWARDLOOK@xxxxxxxxxxxxx
Sent: Tuesday, October 11, 2011
10:32:24 PM
Subject: Re: [FWDLK] Is powder coating a good idea
on/for FWDLK wheels?
I had my wheel rims powder coated and the powder
coat definitely did chip
off where the sharp mounting clips
contacted.
The 6 inch rims that I have since installed, I painted this time
round
because I figured it couldn't be any worse than the damage caused to
the
powder coated finish.
Glenn.
-----Original
Message-----
From: Forward Look Mopar Discussion
List
[mailto:L-FORWARDLOOK@xxxxxxxxxxxxx] On Behalf Of
57superd500@xxxxxxxxxxxxxx
Sent: Wednesday, October 12, 2011 6:13 PM
To:
L-FORWARDLOOK@xxxxxxxxxxxxx
Subject: Re: [FWDLK] Is powdercoating a good
idea on/for FWDLK wheels?
The Wheel Covers do not chip off the
PC.
Mounting doesn't differ, but I do recall some balance weights coming
of pretty soon on one car.
Jim, The
Netherlands.
Quoting Eastern Sierra Adjustment Svc
<esierraadj@xxxxxxxxxxx>:
> Apparently, you haven't rolled-off
any wheel covers, but do
> you get to do much spirited cornering, in
NoEur driving?
>
> Do the wheel covers chip-off the PC, like they
do, with painted
> wheels?
>
> Is a PC coated wheel more
difficult to mount & balance than
> a painted one?
>
>
Neil Vedder
>
>
>
> Jim Hoekendijk wrote:
>>
I did both my cars and never regretted it!
>>
>>
-----Oorspronkelijk bericht-----
>> Van: Forward Look Mopar
Discussion List
[mailto:L-FORWARDLOOK@xxxxxxxxxxxxx]
>> Namens
Eastern Sierra Adjustment Svc
>> Verzonden: dinsdag 11 oktober 2011
20:08
>> Aan: L-FORWARDLOOK@xxxxxxxxxxxxx
>> Onderwerp:
[FWDLK] Is powdercoating a good idea on/for FWDLK
wheels?
>>
>> Pros/Cons?
>>
>> I know that
PC is great on non-touched trim-type items, but on wheels,
>> that
are subject to wheel cover install/removal, and road
hazards?
>>
>>
>> Neil
Vedder
>>
>>
*************************************************************
>>
>>
To unsubscribe or set your subscription options, please go to
>>
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
>>
>>
>>
>
>
*************************************************************
>
>
To unsubscribe or set your subscription options, please go to
>
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
----------------------------------------------------------------
This
message was sent using IMP, the Internet Messaging
Program.
*************************************************************
To
unsubscribe or set your subscription options, please go
to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
*************************************************************
To
unsubscribe or set your subscription options, please go
to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1