Thanks so much to all who
responded! I now have a contact for both used and NOS drums, and if that
doesn’t work out, I’ll convert to 4-wheel disk brakes. J
One more issue: My
original 14-inch wheels will not fit around the new disk brake calipers.
My shop is recommending I switch to 15-inch wheels, and use the 15-inch hubcaps
from a 1956 Dodge – but I’d much rather keep the ’57 look. Can anyone
advise me on a 14-inch Mopar wheel, circa late 60s to mid-70s, that would
accommodate disk brakes?
Anyone have a source for NOS or GOOD used rear brake drums
for a 1957 Dodge Custom Royal?
**** OR ****
Can anyone point to the most compatible Mopar rear axle/brake
assembly (circa late 60s to early 70s) that I can swap with the original?
Let me explain:
I just installed a disk brake conversion kit in the front and
converted to a dual master cylinder (from a ’67 Dodge), but still need to
replace the rear drums. The brakes are unique to Dodge for the 57-58 years
only. From what I can find out, these drums are not being
reproduced. I can’t locate NOS drums, and the used ones I looked at are
too far gone. So . . . my remaining option is to swap out the entire rear
end, so I’ll have an easier time servicing the brakes. The car is in great
shape, but it’s not a trailer queen. I drive it – a LOT – so I need
the brakes.
Can anyone help?
Thanks!
John Williams