Re: [FWDLK] TF speedo pinion needed

[Eastern Sierra Adjustment Svc <esierraadj@xxxxxxxxxxx>]

If that's what I think it is, they can be custom made at various
places.

I had one be made for Horrie when I briefly experimented w/a
3.55 rear end in him.

The base 'Gizmo' is adaptable to a 57 Chubbie (that's how my place
recognized the application) but, I had to tell them what the %-error was
(13%, IIRC) that needed to be corrected, or, to be dialed-in to the Gizmo.

The error was calculated by observing mile post/mileage-reading 
discrepancies
on the odometer; tire size also affects odo errors.

Neil Vedder




Wayne Graefen wrote: am in need of a PN  1732 113  speedometer drive 
pinion for my '60 Imperial's torqueflite.   NOS would be nice but 
excellent used would be fine.   This is a 16 tooth pinion.   Anyone have 
one or a suggestion where to find?   Thanks!  
>  
>
> *************************************************************
>
> To unsubscribe or set your subscription options, please go to
> http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1 
> <http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1>

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1