|
Actually, the only unique part needed for a 56 Dodge TF not already used on the late 56 Chryslers is the bezel around the push buttons, in a Dodge style. And the Chrysler bezel will even fit, just looks different. The push button cluster, buttons, shift cable, etc. is the same as already used on the Chrysler. All the parts were available in 56 for a TF in a 56 Dodge. No change to the rear end is required. All 4 of the PF buttons fit in the TF cluster, only the "2" is new. What I used for the pushbuttons came from a 57 - 59 Dodge truck. These trucks had the same dash structure & pushbutton housing as the 56 trucks, but when the TF option was added in 57, the bezel was made in the 56 style with horizontal bars, if it hadn't already been in existence in case a TF was installed in a 56 Dodge. There is no factory documentation discussing a TF in a 56 Dodge that I have ever seen. We just know the Chrysler parts fit because they do. Many people have made this conversion. The frame slots for positioning the crossmember brackets for a TF also exist. They are just a few inches behind the PF bracket. For details on my 56 Dodge's conversion, see my web site at: http://webpages.charter.net/dhomstad/TransmissionFrame1Source1.htm Dave Homstad 56 Dodge D500 ------------ On Thu, Jan 27, 2011 at 7:11 PM, Ron Waters wrote: > Hmmm. Wouldn't that mean that Mopar vendors would have to produce special 1 & 2 buttons, bezels, rear ends, etc., just for a short run of remaining '56 Dodges ? Doesn't make sense to me from a business standpoint. Can you support this with tech service bulletins, photos or other documentation ? Ron ----- Original Message ----- From: Jack Bitterman Sent: Thursday, January 27, 2011 7:01 PM Subject: Re: [FWDLK] Barrett Jackson Max Wedge Let me take this issue farther. I was 16 in 1956 and an active member of a family owned Dodge Plymouth Dealership in a small town called Robesonia Pa. We sold 600 to 700 new cars a year and at the end of the model year Chrysler would add accessories and change items that we had not ordered. I distinctly remember driving our first 56 C.R. 3 speed too see how much faster it was off the line (being a drag racer) in the last 56 model production we received seven or eight Dodge's with torqueflite but no Plymouths. The five button cluster was in the same housing as the four, but the 1 and 2 were across the bottom where the low button was. I can positively say that they were factory produced near the end of the model run! In about three weeks we were receiving our 57 models and 95% were TF so they were now common place. Jack Bitterman ************************************************************* To unsubscribe or set your subscription options, please go to
************************************************************* To unsubscribe or set your subscription options,
please go to
|
Back to the Home of the Forward Look Network