I have a 57 Plymouth with a 301 V8 and a 318 cam. The
engine was rebuilt 10,000 miles ago.
It appears when the engine was re-started after not running
for 4 years it might have had a sticky intake valve and bent a
pushrod.
I need to replace the push rods and the old push rods
appear to be:
Cup and Ball
5/16" shaft
Overall Length 8.574" (8 9/16")
Wall thickness .060
Does anyone know where I can find new pushrods, possibly
with a thicker wall of .080
Summit Racing has a length of 8.53" could .004 be taken out
in the rocker arm adjustment (they have the .080 wall)?
http://www.ronhilbert.com/plymouth-maintenance.htm
Kind
Regards,
Ronald
D. Hilbert
President
Confluence Internet
Services, Inc.
Search Engine
Optimization, Analytics, Web Development, Design, SD Video & Podcasting,
Mobile Pages
530-755-2288 phone
& fax
www.confluence-is.net
www.outdoortrips.info
www.outdoorguide.net
CONFIDENTIALITY
NOTICE: The information contained in this electronic mail is confidential
information intended only for the use of the entity or individual to whom it
is addressed. If the reader of this message is not the intended recipient, you
are hereby notified that any disseminations, distribution, retransmission or
copying of this message is strictly prohibited. If you have received the
message in error, please notify me immediately by reply transmission. Thank
you.
