|
Folks:
The engine number on my 56 Fury is
FP-242031 which means it takes engine mount 1637585. When I took them off
they looked fine to me so I cleaned, painted and reinstalled them. I
was also lucky to find two NOS mounts for about $65 each. I doubt that I could
do that again for that price.
I have seen advertising for replacing
the rubber insulators on the mounts for about $125. It might be worth the
look.
John Teske
In a message dated 8/13/2010 11:53:36 A.M. Eastern Daylight Time,
jrawa@xxxxxxx writes:
those would be with the dodge-based 270 motor-
nick- those are on the 56 2dr post i gave your friend- they're diff than the
277-326 polys, but the frame end is right- can modify the motor tabs..
-----Original
Message----- From: Ron Waters <ronbo97@xxxxxxxxxxx> To:
L-FORWARDLOOK@xxxxxxxxxxxxx Sent: Fri, Aug 13, 2010 9:39 am Subject: Re:
[FWDLK] 56 Plym motor mounts
To complicate things a bit, the parts book says there
were two different motor mounts used for Plymouth in '56, so it depends
on your engine number. The type 2 variety is the one that interchanges with
'56 Dodge.
Ron
----- Original Message -----
Sent: Friday, August 13, 2010 5:13
AM
Subject: Re: [FWDLK] 56 Plym motor
mounts
Nick,
I
think these are the same as a 56 Dodge V8. One year only and there were
never any aftermarket mounts made. Mitchell sells these on eBay cheaper for
the bargain price of $189.95.
You
might try to convince Imperial services to make these. He sells some other
years for $135 ea.
Now
and Then has both the Dodge (and Plymouth with Dodge V8) and Plymouth (A
Series engine) versions listed as re-vulcanized.
Dave
Homstad
56
Dodge D500
I'm on the lookout
for 56 plymouth v/8 motor mounts.
I
don't need a pair just yet.
All I've found is
Kanter for $215 each rebuilt. $430 is a bit hard to swallow for a pair
of motor mounts.
*************************************************************
*************************************************************
*************************************************************
*************************************************************
To unsubscribe or set your subscription options,
please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
*************************************************************
To unsubscribe or set your subscription options,
please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
|
Back to the Home of the Forward Look Network