Ron,Be sure the BP Blaster didn't ruin the "O" rings. I had sprayed this stuff on a defrost time clock motor to free the motor up and it got on the plastic of the time clock and it dissinigrated the plastic. Jack in Shinglehouse, Pa--nice and warm----- Original Message ----- From: "Ron Waters" <ronbo97@xxxxxxxxxxx> To: <L-FORWARDLOOK@xxxxxxxxxxxxx> Sent: Sunday, July 18, 2010 3:54 PM Subject: [FWDLK] Rebuilding an Oil Pump Hey Gang -I disassembled the oil pump from my 59 Dodge 326 V8. Initially it was frozenand wouldn't turn. But soaking in PB Blaster for a few minutes freed everything up and it spins fine now. What I did notice was that the two rubber O-rings inside were brittle and fell apart when I tried to remove them. Does anyone know where I can get a rebuild kit ? The oil pump is part no. 1618949. Thanks, Ron ************************************************************* To unsubscribe or set your subscription options, please go to http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1 -------------------------------------------------------------------------------- No virus found in this incoming message. Checked by AVG - www.avg.comVersion: 9.0.839 / Virus Database: 271.1.1/3013 - Release Date: 07/18/10 02:35:00 ************************************************************* To unsubscribe or set your subscription options, please go to http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
|