[FWDLK] MOTOR HEAD IGNITION SYSTEM QUESTION
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[FWDLK] MOTOR HEAD IGNITION SYSTEM QUESTION



Hello All
JIM R--feel free to chime in....................

Concerning the ballast resistor on our cars,,,,,,,,,,,
The service manual states about .7 ohm
Most old mopar units that I measured are about  1 ohm

What would be the harm,,if any,,in using a .2 ohm or a 2 ohm resister
Would the points OR coil OR operation really be effected in going that much higher or lower in resistance??

For what its worth , CHEBBIES starting circuit had NO resister and would run on a 2 ohm unit.

THANKS TO ALL
ED ECKERSON

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.