|
that be the one -----Original Message----- From: Dave Stragand <dave.stragand@xxxxxxxxxxxxxxx> To: L-FORWARDLOOK@xxxxxxxxxxxxx Sent: Fri, Aug 21, 2009 9:11 am Subject: Re: [FWDLK] DOOR HANDLE REMOVAL TOOL Personally, I just use an old butterknife with the tip bent over. This special tool is available wherever you eat a nice sit-down lunch. =)
JC Whitney still has the real tool though, at least one that other people have said works. It's $5.99. You use the narrow end.
 -Dave
From: Forward Look Mopar Discussion List [mailto:L-FORWARDLOOK@xxxxxxxxxxxxx] On Behalf Of jrawa@xxxxxxx
Sent: Friday, August 21, 2009 9:03 AM To: L-FORWARDLOOK@xxxxxxxxxxxxx Subject: Re: [FWDLK] DOOR HANDLE REMOVAL TOOL the removal tool for our cars seems to no longer be available... anywhere... but the DID make one, at one time... i have it- it has the typical wire clip removal end for GM/ford and the other end has the 9/16-ish slot with the slight 90deg bend upward to push the square clip aside and allow the handle to be pulled off... the tool is very simple to make... most of the time i dont even bother digging it out, or if its at the other end of the garage- a piece of sheetmetal any width with a kick bent at the end with a pair of pliers is al you need. maybe i'll market the removal tool here.. any takers? heat it up and quench it and its a "hardened tool" now
-----Original Message----- From: Ron Waters <ronbo97@xxxxxxxxxxx> To: L-FORWARDLOOK@xxxxxxxxxxxxx Sent: Fri, Aug 21, 2009 7:40 am Subject: Re: [FWDLK] DOOR HANDLE REMOVAL TOOL I've never seen a commercially available tool for our 55-59 interior door handles. My recommendation is to fabricate the tool based on the illustration in the 57-8 Plymouth shop manual. It's the best alternative to the original pliers-type tool (KD435), which is no longer available and hard to find.
Ron ************************************************************* To unsubscribe or set your subscription options, please go to http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1 *************************************************************
To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1 *************************************************************
To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1 ************************************************************* To unsubscribe or set your subscription options,
please go to
|
Back to the Home of the Forward Look Network