On later cars with the 727 a piece of 3/8" re-bar or a piece of flat steel bent to hang on the torsion bars works well. Don't know about the earlier cars. Bill Huff At 8/1/200902:26 PM, ajl wrote: Hi; I am getting ready to pull a 413 out of my 61 New Yorker. I am going to support the transmission with some type of support system using the two large stabilizer bars that run on both sides of the transmission. Does anyone any input that would be helpful on how to create the support. Thanks AJ ************************************************************* To unsubscribe or set your subscription options, please go to http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1 ************************************************************* To unsubscribe or set your subscription options, please go to http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1 |