Ed,
At partial
throttle positions, such as ¼ to ½, the upshift speed is adjusted with the throttle
linkage to the transmission. The more throttle applied, the higher the upshift
speed. If your trans is shifting too early, adjust the throttle linkage rod to
a longer setting for higher upshift speeds.
Dave
Homstad
56 Dodge
D500
-----Original
Message-----
From: Forward Look Mopar
Discussion List [mailto:L-FORWARDLOOK@xxxxxxxxxxxxx]On Behalf Of eddee@xxxxxxxxxxxxx
Sent: Monday, July 06, 2009 8:51
AM
To: L-FORWARDLOOK@xxxxxxxxxxxxx
Subject: [FWDLK] HI PERF TORQUE
FLITE SHIFT POINT
Hello Members
Question on
the torqueflites that have the hi perf springs and weights in the governor
ie: 57/58
FURY,59 GOLDEN COMMANDO CARS,,,ADVENTURERS etc
According to
the service manual the shift point at dead slow speeds ( traffic jam type of
stuff) from 1st to 2nd is about 10MPH
Just
wondering what it is for the hi perf governor??
THANKS TO ALL
ED ECKERSON
*************************************************************
To unsubscribe or set
your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1