as far as i know the only repro panels available are through r-car in CT.... they do not extend up the toe board, and are only a "close" replacement to the originals. i just brought in a customer's 58 firesweep who bought the full pans, they will work out after some resizing. in the end i would have rather rolled the depressions into flat sheetmetal on the wheel and fabbed the mount depressions... a rust-free cut would be best, try contacting Big M motors, in CA, his name is john fowlie. he has rust free donor cars out there--- the pans are all the same between hardtops and sedan for the section you need. -----Original Message----- From: Gary Nelson <gnelson@xxxxxxxxxxxx> To: L-FORWARDLOOK@xxxxxxxxxxxxx Sent: Thu, 4 Jun 2009 10:18 pm Subject: Re: [FWDLK] Floor pans needed, 57 to 59. Hi All in FORWARDLOOK LAND I am in need of front floor pans from 57 to 59 Chrysler (also DeSoto?). Lt & Rt side, flat area each side of the trans hump, starting in front of the front seat, including the kick up to the firewall join. If you have or know of please contact me. Pay you for your time and effort to cut them out. Thanks for any help, Thank you, Gary, the parts doc Reno, Nevada 89521 USA The Biggest Little City In The World Mail: garythepartsdoc@xxxxxxxxxxxx 775 851-1420 ************************************************************* To unsubscribe or set your subscription options, please go to http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1 ************************************************************* To unsubscribe or set your subscription options,
please go to
|