Re: [FWDLK] 318 Pistons
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] 318 Pistons



Actually the 326 is just a .040 over bored 318 with a hydraulic cam and Ron is correct, it was used in the '59 Dodge only one year..
Adam
 
In a message dated 10/21/2008 8:47:44 P.M. Eastern Daylight Time, Archangel1390@xxxxxxx writes:
 Mel,
 
    In 1959  ONLY the Dodge Cornet had a 326 cu inch engine that was a 318 that was redone by Dodge. That is the only year they used that  326 engine. To look at it you would not be able to tell it from a 318 engine.
 
       Ron



*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1




*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1




Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.