Re: [FWDLK] 1956 Chrysler New Yorker Interior Door Handle/Window Crank Removal

[Richard Whelan <rwhelansr@xxxxxxxxxxxxxxxx>]

Glad it worked for you, Eric. You should have them make it right on that carpet. Most carpet vendors will leave some extra material at the outside edges to allow you to trim for a perfect fit!

----- Original Message -----

From: ESkowron

To: L-FORWARDLOOK@xxxxxxxxxxxxx

Sent: Sunday, August 24, 2008 8:42 AM

Subject: Re: [FWDLK] 1956 Chrysler New Yorker Interior Door Handle/Window Crank Removal

Thanks John, Roger and Richard for your help!  From pictures and dimensions John sent to me, I made a tool out of a plastic putty knife to remove the door handles.  It was still challenging, but I was able to get them all removed so that I can have the fabric replaced on the door panels.

 

I got the fabric and carpet from SMS Auto Fabrics in Oregon.  The fabric was very expensive and some was soiled (the upholsterer was able to get the stains out) but the front carpet set didn?t fit well at all.  It is too short on the sides up against the kick panels (about ¾? on each side).  Does anyone have any suggestions for filling this gap?

 

Thanks again for all of your help!

 

Regards,

 

Eric

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1