|
Wayne:
I do not know if you figured this out yet. I
suspect that your cable does not match you push button assembly in the YOM(year
of manufacturer). The cable and push buttons in many instances must be
from the same year. In other words you can run a 56 button with a 59
transmission, but the cable assembly must be from a 56 push button
assembly.
Might be worth a checkout with the vendor who
supplied your new cable.
Roger Schaaf
300 B Calyfornua
----- Original Message -----
Sent: Thursday, June 26, 2008 5:33
PM
Subject: [FWDLK] 2speed to 3speed
pushbotton problem
Took the Powerflite out of my '59 Dodge and put in a Torqueflite.
Took out the 2spd pushbuttons and put in the 3speed pushbuttons. Have a
new cable from buttons to trans from Imperial Services. I am not getting
enough travel or throw on the cable movement to allow the selector in the
trans to fully drop into its detents regardless of cable
adjustment. Now it can't be the new cable is too long or too short
because it is still the end distance that matters. Is there a
different ratio on some push button assemblies from different
years? I don't know what my 3spd buttons came from - I had them on
the shelf for years.
I'm really baffled on this one. Suggestions appreciated.
Wayne G
*************************************************************
To unsubscribe or set your subscription options,
please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
*************************************************************
To unsubscribe or set your subscription options,
please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
| 
Back to the Home of the Forward Look Network