Re: [FWDLK] overheating 413. any suggestions?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] overheating 413. any suggestions?



 

Hi Mel,

You didn’t mention what ‘stat ya’ got in there, (180° or? Tried it without one I assume? and is it .030” or .060” over?)  Also, where is your timing set, -I’ve heard running retarded can increase the heat load . . .

 

-Bob


From: Forward Look Mopar Discussion List [mailto:L-FORWARDLOOK@xxxxxxxxxxxxx] On Behalf Of Mopar Mel
Sent: Thursday, June 19, 2008 3:08 PM
To: L-FORWARDLOOK@xxxxxxxxxxxxx
Subject: [FWDLK] overheating 413. any suggestions?

 

I recently bored a 413 .030 and am having trouble with it overheading..  Im on my 4rth radiator and 3rd fan.  No matter what I do, idle or down the road, Im running 205-215degrees.  Used a mechanical gauge, mark 8 fan, 3 water  pumps, 2 copper and 3 allum new radiators, Im at wits end.. any ideas from past experience?  Im starting to wonder if the .060 was too much…  any comments?

 

mel

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1




Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.