[FWDLK] stainless moulding clips

[Nichols <nick.barb@xxxxxxxxxxxxx>]

Ted,

Here is the information with the original thread from Glenn Barratt.   The address and website is below the photo.

On Nov 20, 2007, at 7:10 PM, Roman Lucyszyn wrote:

Nick..we're not sure also on actual appilcation..We're going buy another vendors infromation..and that not all correct to the types in this picture..The '57 Plymouths takes all of the bottom row in the picture and middle row ..The only ones we have left in our stock is the top row and the bottom row...we have the middle row in stock in about 3-4 weeks..We only do this run once a year..If you can use the 2 types we be glad to sell them to you @ $2.00 ea + S&H.
 
The bottom clip measures 1-1/4" long
The top clip measures 1-3/16" long.with a taller "Z" shape step........roman.

Begin forwarded message:

From: Glenn Barratt <FURY@xxxxxxxxxx>

Date: November 20, 2007 11:48:21 AM PST

To: L-FORWARDLOOK@xxxxxxxxxxxxx

Subject: Re: [FWDLK] stainless moulding clips

Reply-To: Glenn Barratt <FURY@xxxxxxxxxx>

Nick.
I got mine for my 57 Plymouth (don't know if DeSoto is the same or not...?)
from the following place;

RJL Auto Fasteners
PO Box 143
Penfield, NY 14526
(315) 986-7121
website www.rjlfasteners.com

Good luck.
Glenn.
57 Fury.


-----Original Message-----
From: Forward Look Mopar Discussion List
[mailto:L-FORWARDLOOK@xxxxxxxxxxxxx] On Behalf Of Nick Nichols
Sent: Wednesday, November 21, 2007 5:00 AM
To: L-FORWARDLOOK@xxxxxxxxxxxxx
Subject: [FWDLK] stainless moulding clips

Does anyone know where to find the clips for the long stainless  
moulding that fits across the bottom of the rear window for a '58  
DeSoto?  I believe the clips are the same for any late 50s Mopar.    
thanks.   Nick Nichols

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1