So is standard heater hose the right stuff, size wise, for my 58 Ply ? Ron > Ron, if you are not going to be using date-coded MoPar heater hose, you > might consider installing > push-on hydraulic hose ; AKA: "power-steering" hose, as the latter is > considerably stronger, than the former > which is rated for no chemicals, harsher than that of anti-freeze. > > A problem definitely can occur when HEATER hose is mistakenly installed > on a P/S application! > > Neil Vedder > > Ron Waters wrote: > > Hi Everyone - > > > > I need to get some heater hose for my 58 Plymouth. Is standard heater hose > > the correct size, or is there a special size required ? Also, are both the > > outgoing and return hoses the same size ? > > > > Thanks, > > > > Ron > > > > ************************************************************* > > > > To unsubscribe or set your subscription options, please go to > > http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1 > > > > > > > ************************************************************* To unsubscribe or set your subscription options, please go to http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
|