Re: [FWDLK] Carter B and B
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] Carter B and B



 PS- does the idle mixture screw adjust properly now?  (Does the engine
start to die when the screw is in past 1 turn?)

-----Original Message-----
From: Forward Look Mopar Discussion List
[mailto:L-FORWARDLOOK@xxxxxxxxxxxxx] On Behalf Of Nichols
Sent: Wednesday, August 22, 2007 8:55 PM
To: L-FORWARDLOOK@xxxxxxxxxxxxx
Subject: [FWDLK] Carter B and B

I put a rebuild kit in the Cater B and B and it runs a lot better but still
stumbles a bit at idle.  I cleaned out all the passages with air. 
   Anyway, my question is this:   Should there be a trickle of fuel 
coming out of the two center venturi holes which are just below the 
choke valve?   I didn't notice it before but it appears that fuel is 
sputtering through these holes at idle.   If this is not right, what is 
causing it?  thanks much.   Nick Nichols.

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.