[FWDLK] Flathead 6 Oil Filtration Improvement
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[FWDLK] Flathead 6 Oil Filtration Improvement



My '55 Belvedere, with its run-laps-around-any-V8 flathead 6 (good-natured satire) has the original-style bypass-flow oil filter, attached to the side of the engine.  Over the years I've used the sealed-canister replacements (e.g. NAPA 1035), but those seem to be getting more rare.  I see one vendor peddling one such filter on eBay for $50 plus S&H.
 
So, does anyone know of a conversion, private or commercially-available, to full-flow engine oil filtration for this engine?  It seems like it'd be easy to install an adapter to the existing oil filter lines to utilize a spin-on filter, but that would still be filtering only part of the engine oil.
 
Thanks,
Jason.

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1




Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.