Re: [FWDLK] L-FORWARDLOOK Digest - 27 Mar 2007 to 28 Mar 2007 (#2007-7)
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] L-FORWARDLOOK Digest - 27 Mar 2007 to 28 Mar 2007 (#2007-7)



No, it's worthless, you should send it to me - *grins*


Seriously, the guys at thejalopyjournal.com HAMB board would know this one, the P I believe means it fits Plymouth, as to the year most of those intakes are made universal enough to fit all engines of a certain family, it's just a matter of what year it was made and wether the deck height changes during the run.

As for the 97's shoot me an e-mail off list if you need info on those.



I almost could use that for a hot rod project, would give me an excuse to run a Poly, have a '26 Dodge cowl/doors and some '57 Plymouth rotty quarters I was toying with making a roadster pickup out of -



Bill K.






------------------------------

Date:    Wed, 28 Mar 2007 20:36:41 EDT
From:    Jackie Wrinkles <MoparJackie@xxxxxxx>
Subject: Three deuce manifold


I just picked up a 3 deuce poly intake I think it is and it has 3 Stromberg 97's on it.The casting on the Edelbrock aluminum manifold is P600.Does it pertain to any certain year and does it have any value?Thanks all. Jack



*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.