Re: [FWDLK] '59 Chrysler UTE
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] '59 Chrysler UTE



All,
The engine is a Chrysler design "Hemi" six manufactured here in Oz from 1970 to 1981.
They were werer a semi-hemi with canted valves actuated by hydraulic lifters and came in 215, 245 & 265 cubic inch capacities.
Probably the most well known of these engines was the "6 pack" triple 45mm Weber carbied version of the 265 fitted to R/T Valiant Chargers which were a force to be reckoned with.
The Hemi 6 was also used in the light truck range replacing the good old slant six.
The Wayfarer ute mentioned would originally have been fitted with a flat head 6cyl and the later & last 60, 61.models called the AP3 had a 318 poly V8 optional.
HAPPY NEW YEAR TO ALL,
Alan Down Under.
----- Original Message -----
Sent: Tuesday, January 02, 2007 7:31 AM
Subject: [FWDLK] '59 Chrysler UTE

Dan, I saw this car in a Swap Meet in Denver a couple of years ago.  It looked like the same shape as today pictures; Kinda rough but running!  The engine appeared to be possibly, but not likely a Chrysler make. It appeared to be an International Truck engine, but even then there were enough dissimilarities to allow anything else. As I remember, it was not a Hemi designed head, just a rounded valve cover, and spark plugs from the side.  The radiator core support appeared to be modified (not a professional appearing job) so the engine's length could be compensated. The owner did not seem to be forthcoming with a great deal of information, but maybe he sensed that I wasn't about to buy it, only to talk about it.
 
The website address is a little off, though.  The correct address is www.classicalgasstation.com , and you'll find it listed under other makes.
 
59 Chrysler (looks like a 56 Plymouth from the side) UTE, 1 of 347 made in Australia, runs great, original interior, mini 6 Hemi six cylinder (?), $12995, www.classicgasstation.com in CO

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1




Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.