Re: [FWDLK] Differential Gasket source for 1956 New Yorker ?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] Differential Gasket source for 1956 New Yorker ?



I would make one, if it was my project.
You have the pattern in the axle, differential, and/or the pumpkin.
Trace it, or tap it out with a small hammer and a piece for
the gasket, or a pattern. Trim it. Seal it with a skim of TV
if you think it needs it, and use it.  It is almost fun.
BUTT.
 
I would have used TV only, but I thought the compressed gasket in place
probably gave the needed spacer thickness to align the side gears with the
axle centerlines.  Maybe it isn't that important.
 
Tom S
Southern Ohio.


From: Forward Look Mopar Discussion List on behalf of Michael Rusnak
Sent: Sat 10/21/2006 10:48 AM
To: L-FORWARDLOOK@xxxxxxxxxxxxxx,
Subject: [FWDLK] Differential Gasket source for 1956 New Yorker ?


I have been having a hard time finding a differential gasket for my 1956 New Yorker. Can someone forward the Napa or other parts supplier part number. Thanks Mike 

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1




Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.