[FWDLK] Fwd: [FWDLK] Continuously breaking rotor

[Adam Lindenbaum <AdamL57@xxxxxxx>]

 

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

--- Begin Message ---

• From: AdamL57@xxxxxxx
• Date: Sun, 1 Oct 2006 21:17:16 EDT

 

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

--- Begin Message ---

• From: AdamL57@xxxxxxx
• Date: Sun, 1 Oct 2006 21:15:58 EDT

It can be welded,take a flat 2X4 or 2X6 piece of wood and a floor jack,jack up the engine under the oil pan with the wood between the jack and the pan and see if the engine lifts off of the mounts.

Adam

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

--- End Message ---

--- End Message ---