[FWDLK] Torsion bars
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[FWDLK] Torsion bars



Hi all,

 

Can someone tell me why the torsion bars on my ’57 300C have crept forward about an 1/8 of an inch on one side and nearly 1/4 on the other. They are supposed to sit hard back against the internal spring clip in the rear anchor….right? Does this mean the lower control arm bushings are worn?

 

Thanks

Owen  

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1




Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.