Re: [FWDLK] DeckLid Torsion Bar tool.
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] DeckLid Torsion Bar tool.



Marv -
 
I would think that a large pair of Vice Grips and a large screwdriver would do the trick.
 
Ron
----- Original Message -----
Sent: Thursday, May 04, 2006 9:56 PM
Subject: [FWDLK] DeckLid Torsion Bar tool.

I need help from the membership 
I am looking for a torsion bar tool to remove the decklid (trunk) torsion bars on my 58 Chrysler. The manual calls out a Miller tool C-3445.  Not quite sure of the shape of the end from the photo in the book.   Any information on a safe technique for removal or someone who would loan such a tool would be appreciated.
Thanks   Marv

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1




Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.