Re: [FWDLK] Turn Signal - 1955 Dodge Coronet

[John McCann <jmccann@xxxxxxxxxxxxxx>]

Try loosening and retightening the screws holding the tail light assembly to the car, sometime the ground connection is corroded and needs to be re-established. You can use a test light to connect the bulb housing to a good ground, the test light will light if the ground is bad, naturally the light has to be on for this test to work. The tail light portion of the bulb may appear to work making you think the ground is OK but it may be getting a complete circuit through the brake light filament.

John

----- Original Message -----

From: Tom Taylor

To: L-FORWARDLOOK@xxxxxxxxxxxxx

Sent: Tuesday, December 27, 2005 4:54 AM

Subject: [FWDLK] Turn Signal - 1955 Dodge Coronet

I replaced the bulb in my right rear tail light, brake light, turn signal socket.  The tail light function works but no light on turn signal.  The right front turn signal light  flutters.  The turn signal relay audible  clicks once and stops.  Left side works fine.  Any trouble shooting hints here?  Tom

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1