The installation sheet dose not tell but I have a #90 in mine, and I don't
leave it on so I don't melt my lens.
david Wallace
58 Fury
----- Original Message -----
From: "Brad Werner" <bwerner@xxxxxxxxxxxx>
To: <L-FORWARDLOOK@xxxxxxxxxxxxx>
Sent: Friday, September 02, 2005 9:01 PM
Subject: Re: [FWDLK] Hand Brake Warning Light
Ron ,
Just pulled the brake warning light from my '57 Dodge .The bulb was a T90
fits from the back of the warning light bezel. The bulb base goes into a
standard auto bulb base which has small prongs surrounding it. This
assembly
snaps into the warning light bezel with only the glass bulb inside the
part
that attaches to the dash.By unscrewing the nut behind the warning light
dash bezel and then the bezel on front of the dash it will simplify
replacing the bulb.
Hope this helps,by the way the bulb said made in Mexico !!
Brad Werner
'57 Dodges l
l----- Original Message -----
From: "Ron Waters" <ronbo97@xxxxxxxxxxx>
To: <L-FORWARDLOOK@xxxxxxxxxxxxx>
Sent: Friday, September 02, 2005 3:15 PM
Subject: Re: [FWDLK] Hand Brake Warning Light
The 1004 doesn't work either. The globe is 3/4" long, which is way too
big
for this light.
Ron
----- Original Message -----
From: "Jim Hoekendijk" <jim.hoekendijk@xxxxxx>
To: <L-FORWARDLOOK@xxxxxxxxxxxxx>
Sent: Friday, September 02, 2005 2:42 PM
Subject: Re: [FWDLK] Hand Brake Warning Light
> Ron,
>
> I went into my garage and looked in the bag with lights. There's a
> carton with one lamp left, I think it's the one, but I'm not sure...
> It's similar to a 90, but longer, it's a....
> 1004
>
> Jim.
>
> ----- Oorspronkelijk bericht -----
> Van: Ron Waters <ronbo97@xxxxxxxxxxx>
> Datum: vrijdag, september 2, 2005 8:25 pm
> Onderwerp: Re: [FWDLK] Hand Brake Warning Light
>
> > Jim -
> >
> > Neil Vedder also suggested the 1816, but when I went to the local
> > auto parts
> > store, the 1816 they showed me is a tiny, single contact bulb. The
> > one I
> > need is a two contact bulb with a standard size base, similar to a
> > #90. I
> > should mention that this is hand brake warning light, part #
> > 1770721. Any
> > ideas ?
> >
> > Ron
> >
> > ----- Original Message -----
> > From: "Jim Hoekendijk" <jim.hoekendijk@xxxxxx>
> > To: <L-FORWARDLOOK@xxxxxxxxxxxxx>
> > Sent: Thursday, September 01, 2005 1:38 AM
> > Subject: Re: [FWDLK] Hand Brake Warning Light
> >
> >
> > > I had the same problem with my 57 Dodge. I found the answer in my
> > > workshop manual and the bulb at Pep Boys. It's only that I've
> > lent my
> > > manual to someone I can not reach now... Could be 1816, since I
> have
> > > some cartons left...
> > > Be carefull not to use to much candle power, I changed my lens
> > because> the prior owner did use a bulb with to much cancle power,
> > and the red
> > > lens is melted.
> > >
> > > Jim Hoekendijk.
> > > The Netherlands
> > > '57 Dodge D500
> > >
> > >
> > > ----- Oorspronkelijk bericht -----
> > > Van: Ron Waters <ronbo97@xxxxxxxxxxx>
> > > Datum: donderdag, september 1, 2005 3:27 am
> > > Onderwerp: Re: [FWDLK] Hand Brake Warning Light
> > >
> > > > Unfortunately, neither work. The glass globe is too large to fit
> > > > inside the
> > > > threaded cylindrical part that the front lens and bezel thread
> > > > onto. Am I
> > > > missing something ?
> > > >
> > > > Ron
> > > >
> > > >
> > > > ----- Original Message -----
> > > > From: "Bill Watson" <wwatson5@xxxxxxxxx>
> > > > To: <L-FORWARDLOOK@xxxxxxxxxxxxx>
> > > > Sent: Wednesday, August 31, 2005 3:54 PM
> > > > Subject: Re: [FWDLK] Hand Brake Warning Light
> > > >
> > > >
> > > > > According to the Chrysler Parts Catalogue, it is part number
> 142
> > > > 453.which
> > > > > is bulb #90 (6 candlepower)
> > > > >
> > > > > Dodge used a 142 451which is bulb #68 (3 candlepower)
> > > > >
> > > > >
> > > > > Bill
> > > > > Vancouver,. BC
> > > > >
> > > > >
> > > > >
> > > > > ----- Original Message -----
> > > > > From: "Ron Waters" <ronbo97@xxxxxxxxxxx>
> > > > > To: <L-FORWARDLOOK@xxxxxxxxxxxxx>
> > > > > Sent: Wednesday, August 31, 2005 12:29 PM
> > > > > Subject: [FWDLK] Hand Brake Warning Light
> > > > >
> > > > >
> > > > > > Hi Gang -
> > > > > >
> > > > > > My 58 Plymouth has a hand brake warning light, which is the
> > > > same as the
> > > > > one
> > > > > > used on the 58 Dodge. I need to replace the bulb, but have no
> > > > idea what
> > > > > the
> > > > > > size of the bulb is. Already determined that it is not a #90
> > > > or #1004.
> > > > > Went
> > > > > > to the local auto parts stores and we couldn't match it up.
> > > > Any ideas ?
> > > > > >
> > > > > > Thanks,
> > > > > >
> > > > > > Ron
> > > > > >
> > > > >
> > > > > *************************************************************
> > > > >
> > > > > To unsubscribe or set your subscription options, please go to
> > > > > http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
> > > >
> > > > *************************************************************
> > > >
> > > > To unsubscribe or set your subscription options, please go to
> > > > http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
> > > >
> > >
> > > *************************************************************
> > >
> > > To unsubscribe or set your subscription options, please go to
> > > http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
> >
> >
>
> *************************************************************
>
> To unsubscribe or set your subscription options, please go to
> http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
*************************************************************
To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
*************************************************************
To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
*************************************************************
To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
|
|
Back to the Home of the Forward Look Network