Jim - Neil Vedder also suggested the 1816, but when I went to the local auto parts store, the 1816 they showed me is a tiny, single contact bulb. The one I need is a two contact bulb with a standard size base, similar to a #90. I should mention that this is hand brake warning light, part # 1770721. Any ideas ? Ron ----- Original Message ----- From: "Jim Hoekendijk" <jim.hoekendijk@xxxxxx> To: <L-FORWARDLOOK@xxxxxxxxxxxxx> Sent: Thursday, September 01, 2005 1:38 AM Subject: Re: [FWDLK] Hand Brake Warning Light > I had the same problem with my 57 Dodge. I found the answer in my > workshop manual and the bulb at Pep Boys. It's only that I've lent my > manual to someone I can not reach now... Could be 1816, since I have > some cartons left... > Be carefull not to use to much candle power, I changed my lens because > the prior owner did use a bulb with to much cancle power, and the red > lens is melted. > > Jim Hoekendijk. > The Netherlands > '57 Dodge D500 > > > ----- Oorspronkelijk bericht ----- > Van: Ron Waters <ronbo97@xxxxxxxxxxx> > Datum: donderdag, september 1, 2005 3:27 am > Onderwerp: Re: [FWDLK] Hand Brake Warning Light > > > Unfortunately, neither work. The glass globe is too large to fit > > inside the > > threaded cylindrical part that the front lens and bezel thread > > onto. Am I > > missing something ? > > > > Ron > > > > > > ----- Original Message ----- > > From: "Bill Watson" <wwatson5@xxxxxxxxx> > > To: <L-FORWARDLOOK@xxxxxxxxxxxxx> > > Sent: Wednesday, August 31, 2005 3:54 PM > > Subject: Re: [FWDLK] Hand Brake Warning Light > > > > > > > According to the Chrysler Parts Catalogue, it is part number 142 > > 453.which > > > is bulb #90 (6 candlepower) > > > > > > Dodge used a 142 451which is bulb #68 (3 candlepower) > > > > > > > > > Bill > > > Vancouver,. BC > > > > > > > > > > > > ----- Original Message ----- > > > From: "Ron Waters" <ronbo97@xxxxxxxxxxx> > > > To: <L-FORWARDLOOK@xxxxxxxxxxxxx> > > > Sent: Wednesday, August 31, 2005 12:29 PM > > > Subject: [FWDLK] Hand Brake Warning Light > > > > > > > > > > Hi Gang - > > > > > > > > My 58 Plymouth has a hand brake warning light, which is the > > same as the > > > one > > > > used on the 58 Dodge. I need to replace the bulb, but have no > > idea what > > > the > > > > size of the bulb is. Already determined that it is not a #90 > > or #1004. > > > Went > > > > to the local auto parts stores and we couldn't match it up. > > Any ideas ? > > > > > > > > Thanks, > > > > > > > > Ron > > > > > > > > > > ************************************************************* > > > > > > To unsubscribe or set your subscription options, please go to > > > http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1 > > > > ************************************************************* > > > > To unsubscribe or set your subscription options, please go to > > http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1 > > > > ************************************************************* > > To unsubscribe or set your subscription options, please go to > http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1 ************************************************************* To unsubscribe or set your subscription options, please go to http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
|