Neil - It may be the nylon channel that is at the very back where the roof rail meets the rear window opening. This is the thing that guides the 'up, then over' movement of the quarter window. I've cleaned a number of them and they seem to collect dirt, dried Lubriplate, etc., which makes the 'over' operation difficult. Also, this channel can be aligned for better operation. Ron ----- Original Message ----- From: "eastern sierra Adj Services" <esierraadj@xxxxxxxxx> To: <L-FORWARDLOOK@xxxxxxxxxxxxx> Sent: Wednesday, April 13, 2005 2:32 AM Subject: [FWDLK] Anyone a-door their windows'.... > operation? > > I don't; I clearly recall, on my father's 57 Dodge CRL 2-dr, that the > rear windows 'took' 2-hands' effort, to raise them, to their > full-upright position, and to begin to lower them, therefrom. > > My car's rear windows don't fully "close" unless the vertical edges are > pulled-forward, by hand, to finish the operation--it seems that the > windows 'run-out' of forward-adjustment, on their tracks, with the > windows still not fully-closed. And, yes, I've had the trim panels 'off' > many times, over the years, playing with, and lubricating, the tracks. > I've even "scalped" the inner-ceiling of the Finnish-flocked roof rail > weatherstrips, to create more 'head room, for the windows' movement. > And,yeah (ii), the windows' vertical-movement adjustments are set as > 'well' as I can 'get' them. > > The front windows are adjusted so tightly, too, that raising > them is not for the limp-wristed, either, but @ least, they do NOT > rattle, and do align perfectly (fore/aft, in/out) with the rear windows. > > I'm just curious, does anyone with a 57+ non-sedan Mope have windows > (before-or-after weatherstrip replacement) that truly operate "easily", > and fully, as they, hopefully(!) were designed, to operate? ? If you DO, > count yourself as being fortunate. > > Neil Vedder > > ************************************************************* > > To unsubscribe or set your subscription options, please go to > http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1 ************************************************************* To unsubscribe or set your subscription options, please go to http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
|