Re: [FWDLK] reply to: Keys?

[Dave Casey <dcasey@xxxxxxxxxxxxx>]

The way ignition cylinders come out, at least every time I've done one, is
by pushing the pin when in the ACC position. The key will then turn even
further to the left and the cylinder will come out.

Dave Casey

----- Original Message -----
From: "Mike Apfelbeck" <moparmike72@xxxxxxxxxxx>
To: <L-FORWARDLOOK@xxxxxxxxxxxxx>
Sent: Friday, April 08, 2005 6:08 PM
Subject: Re: [FWDLK] reply to: Keys?


> Tom,
> The only trick involved is having the switch in the run position so the
> hole is lined up with the pin that needs pushed in to release the
> tumblers.
> A locksmith should be able to pick the lock, to turn the switch on and
> expose the release pin.
> Mike
>
> At 07:18 PM 4/6/2005, Thomas Miller wrote:
> > Okay,
> >
> > So what exactly is the "trick" to getting the ignition lock cylinder
> > out?
> >
> > It sticks in my mind that there's a little hole you can stick a paper
> > clip into on the front of the cylinder that will release it, **but**
> > that the trick only works if you have the proper key inserted.
> >
> > Can you get it out easily otherwise?  Enquiring minds want to know!!
> >
> > Thanks gang.
> >
> > Best Regards,
> >
> > Thomas F. Miller
> > tfm@xxxxxxxxxxxx
> > '57 300C, '57 New Yorker T&C Wagon(s)
>
> *************************************************************
>
> To unsubscribe or set your subscription options, please go to
> http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1