It there a way to remove door panels with a home
tool? I used a screw driver to slowly dislodge the clips holding panel
to the door. I did a good job not hurting the panel or the door.
The hard part I have right now is removing the interior handles. I was
following the instructions in the book I have. I just can't see what on
the handle has to get loose.
The instructions in the book are as follow:
INSIDE DOOR AND WINDOW REGULATOR
HANDLES
The door and window regulator handles are attached
with a spring type clip.
Turn window regulator handle down so that the
retainer clip is to the left. Place tool between washer and handle. Push tool
from left to right and at the same time pull outward on
handle.
When I look inside of the door panel I can clearly see the
spring clip but the retainer.
Is there any home tool I can use to remove the
handles?
And I don't want to use the Grinder..
Thanks,
Joey