Re: [FWDLK] Oil Pump Priming Tool
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] Oil Pump Priming Tool



And I'd turn it in the same direction as normal distributor
rotation.  (It's clockwise on my DeSotos, but I'm not 100% sure your YOUR
car.)  Don't go real fast or you'll churn up a lot of foam and not be as
effective as a nice medium-speed rotation.

Ed Petrus

At 09:20 PM 9/30/2004, MacGyve755@xxxxxxx wrote:
The screwdriver-blade end is the end of the distributor, which sets in the
oil pump drive gear and driveshaft. You'll have to pull the pump
gear/driveshaft first, and then you'll see the hex hed end which is on the
oil pump itself.  (Take a look at the picture I sent you earlier and
you'll see what I mean)

-Dave

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************


To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.