Re: [FWDLK] Oil pressure line-FIX
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] Oil pressure line-FIX



I recently bought 2 oil pressure gage lines from a fellow selling them on
eBay. He has sold 2 more on eBay and I suspect he has a supply of several
more. Ebay item : 2486466553;

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2486466553&rd=
1&sspagename=STRK%3AMEWA%3AIT
Item description: "Here's a NOS Oil Pressure Line #11094 (s/a #1313643,
1325343) Fits: 6 & 8-cyl Chrysler models
1949-1950-1951-1952-1953-1954-1955-1956. This 38"+ line also fits the 55-56
V8 Mopars - Fury, D500, Belvedere, Custom Royal. Here's some cheap
insurance - don't let an old, cracked hose ruin your engine!"
The seller is Neil Riddle at seaplym@xxxxxxxxxxx He specializes in 46 - 54
Mopar parts.

My 55 - 58 Parts book says Mopar P/N 1325343 fits 55/56 Dodge V8; P/N
1313643 fits 55 Plymouth, 55/56 DeSoto, and 55 - 58 Chrysler.

He sold me 2 for the same price as the final price on eBay. The last one on
eBay sold was about $35 with shipping.

Dave Homstad
56 Dodge D500

-----Original Message-----
From: Forward Look Mopar Discussion List
[mailto:L-FORWARDLOOK@xxxxxxxxxxxxx]On Behalf Of Blackmore, Dawson SIK
Sent: Tuesday, August 24, 2004 6:30 AM
To: L-FORWARDLOOK@xxxxxxxxxxxxx
Subject: Re: [FWDLK] Oil pressure line-FIX

Mine wasn't at the body point but rather at the top where it comes out of
the engine and turns down towards the whole in the firewall.  At first I
thought the car had a valve cover gasket let go since there was a lot of oil
on the manifold and side of the engine.  We kept checking the area for
leakage but didn't see anything.  We finally started the engine and saw it
spraying from the pin-hole.  We put a temp patch around the hole by placing
a larger hose over it and tightened that down with clamps.  We still had a
seepage but no more spray.

Since taking the line off the car I have contacted most of the major
suppliers of Mopar parts and have been told "GOOD LUCK" this line is unique
to the 57 DeSoto Firesweep S-27.  Have contacted a local hydraulic shop and
if they can't get the fittings they are going to do Neil's fix.

Dawson

-----Original Message-----
From: esierraadj@xxxxxxxxx [mailto:esierraadj@xxxxxxxxx]
Sent: Monday, August 23, 2004 12:35 PM
To: DBlackmore@xxxxxxxxxxxx; L-FORWARDLOOK@xxxxxxxxxxxxx
Subject: Oil pressure line-FIX


Back when I belonged to the WPC Club, I wrote a mini-article about how I
simply-fixed a pinhole leak that developed in Horrie's oil-pressure
line,
that 'runs' to the dash-gauge, thru the firewall.

Before I mention the 'fix', I urge ALL of you, with cars having an oil
gauge, to go out to your cars, & check these rubber-lines, for
contact/rubbing abrasions, like where the lines contact the
throttle-linkage-bracket, on the firewall.

One memorable day, 15+ years ago, I returned home, from a local
cruze-around, to discover an apparent engine-fire occurring, 'from' all
the smoke that was , then, billowing from under the hood!!

Quickly raising the hood revealed an actual oil leak, that was
dripping/spraying onto the driver's side exhaust manifold.

What I dscovered was that the oil-gauge line, from, oh, March, 1957
until that day, had been lying against the subject "t-l-b" , until, from
very minor driving-vibrations, a crescent-gouge had been worn into that
line, until the pinhole failure eventually developed, with the
aforementioned
"excitement". Fortunately, I was 'home' when the line-failure (finally)
occurred!!

Like Dawson, I encountered great difficulty in locating a NOS or NORS
(after-market) oil pressure line, & my local "hydraulic" shop didn't
have the esoteric fitting, that conects to the gauge.

What to do??

Well, kind of like, for  the stolen Civil War train, "The General", when
its Union Army liberators ran out of track , they just moved the track,
from the rear, to replace a destroyed-section, lying in front of the
train.

Well, that's not a perfect analogy, but I do try to use "what's at
hand", to effect repairs, when ever possible.

What I did, to fix the oil line leak, & to PREVENT any future leak, from
its wearing against the "t-l-b"  was to have that hydraulic shop,
merely, install (brass) CONNECTION-
FITTINGS, to the area of the failure. The "c-f's"
now lie against the "t-l-b", preventing any further abrasions/wear onto
the oil line.

Subsequently, no problemos from/with the oil line---btw, the area of the
'failure' is virtually "invisible", due to its small-size, and its
location, with its  hand-in-glove fitment, lying against
the "t-l-b"-----the line, itself "looks" fine, but be sure to run your
hand all-around its length, to check for wear-points!!

Neil Vedder

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.