[FWDLK] 1955 Plymouth wheel bolts
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[FWDLK] 1955 Plymouth wheel bolts



I have had my two 1955 Belvederes for about three years, and I am amazed that I never before noticed something.  The front hubs on both cars have male studs from the hubs, and the wheels are attached by lug nuts.  Each of the rear wheels, though, have the lug bolts, and female threads in the axle hub.  This is as I thought should be the proper attachment.  It appears that sometime it each of their lives, my parts car, and my restoration Sport Coupe, have had their front hubs changed.  If this is the case, what front hubs & drums could they be?  I thought that lug bolts were used until around 1958.  When did Mopar change from lug bolts to lug nuts?  Is it possible that the mixed bolts & nuts were factory original?  It appears that all other components on each of the cars is original, and I wonder why someone would change something so insignificant.
 
Thanx,
Mike Higgins
1955 Belvedere Sport Coupe (apparently with altered front hubs)



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.