Re: [FWDLK] DeSoto Rubber Dust shields
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] DeSoto Rubber Dust shields



Bryan -

If you're referring to the small rubber washers about 3/4" wide that fit
between the center support plate and the backing plate (shield) by the
adjusting cams, I'd be curious about this as well. Part number 1633 111.

Ron

----- Original Message -----
From: "Bryan Scott" <scott1990@xxxxxxxxxxx>
To: <L-FORWARDLOOK@xxxxxxxxxxxxx>
Sent: Saturday, March 06, 2004 6:08 PM
Subject: [FWDLK] DeSoto Rubber Dust shields


> Greetings All!
>
> Now that the weather is finally slightly above frigid, I started to re-do
my
> brakes.  The service manual shows a rubber dust shield that goes against
the
> support plate.  Mine is long gone, and I don't see any such monster for
sale
> in any of the dependable supply catalogs, such as Kanter's.  What have you
> folks done?  Just forget about it?  Is there a supplier for these shields?
>
> (My car is a 58 Fireflight sedan.)



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.