Re: [FWDLK] Under Body paint
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] Under Body paint



Personally, I would paint anything stripped to bare metal with urethane
primer and then topcoat that with urethane enamel.  I've found based on my
own experience that urethane is a tough, very durable finish for chassis
parts.  I've never used POR-15 myself, but I've heard a few horror stories
about using it over bare metal (rust breaking out UNDER the POR-15 and/or
the POR-15 just peeling off).

You do need a fresh air respirator with urethane, though, especially if you
are painting inside.

Curtis in sunny Tallahassee, Florida

-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
Over 25,000 pages of archived Forward Look information can be easily searched at
http://www.forwardlook.net/search.htm  Powered by Google!



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.