[FWDLK] Fw: [Chrysler300] High Speed Starters For Chrysler 300s
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[FWDLK] Fw: [Chrysler300] High Speed Starters For Chrysler 300s '55-'65



Following a recent discussion on the 300 Club list concerning the lack of
availability of high speed/torque starters for some of the '55 thru '65
Mopars. Tim from Roadrunner Starters in New Zealand can supply them, these
are far more efficient than the original. I can recommend Tim's service &
workmanship.
If interested please contact Tim directly.
thanks
Owen
----- Original Message -----
From: Road Runner Starters <tim.wood@xxxxxxxxxxxx>
To: Owen & Jo Grigg <ram300@xxxxxxxxxx>
Sent: Wednesday, September 10, 2003 3:03 PM
Subject: Re: High Speed Starters For Chrysler 300s '55-'65


> Hi Owen,
>
> 1955/6 :  can't find these  # 's but will keep trying (I suspect for 12v
you
> can use "57" starter)
>                with earlier 9t 29mm pinion. Our part # RS109D US$188 +
> Shipping) To confirm
>                can someone e-mail some measurements off an OE starter.
> 1957/8 :  RS109C US188 + Shipping. Replaces 1689342  MDL6001 , unsure
about
> 1842562
>                but suspect they are the same.
> 1959/61 : RS109E (mounting holes offset to starter centreline, 4" centre
to
> centre, 3.25" spigot
>                 into bellhousing, 9 tooth 25mm pinion.) US$188 + Shipping.
> 1962 :RS709 US$188 +Shipping.
>
> I Hope this helps, any questions or further info. please e-mail.
>
> Shipping is US$56 for 4-10 day delivery or US$48 for 11-25 day delivery.
>
> Kind regards,
>
> Tim Wood.
>
> ----- Original Message -----
> From: Tony Rinaldi <awrdoc@xxxxxxxxx>
> To: Road Runner Starters <tim.wood@xxxxxxxxxxxx>
> Cc: Owen & Jo Grigg <ram300@xxxxxxxxxx>; Chrysler 300 Club
> <Chrysler300@xxxxxxxxxxxxxxx>; John Hertog <crossram@xxxxxxxxxxxxx>;
Warren
> R Anderson <wranderson@xxxxxxxxxxxxx>; Charlie Valentine
> <cross.ram@xxxxxxxxxxx>; <fabe7445@xxxxxxxxxxxxx>
> Sent: Wednesday, September 10, 2003 2:03 AM
> Subject: Re: High Speed Starters For Chrysler 300s '55-'65
>
>
> > Hi Tim,
> >
> > This is a response to your request for OE#s for our Chrysler 300s:
> >
> > 1955:  1527689
> > 1956:  1642140
> > 1957/58  :  1842562
> > 1959 thru 61: 1889200
> >
> > There also was a #1604 480 suggested for 1955. Wonder if this was a
6V/12V
> > issue.
> >
> > Our understanding is that Road Runner Starters does manufacture high
speed
> > starter alternatives for our vehicles. Please "reply all" to this
e-mail.
> I
> > am asking Owen Grigg to post your reply to the Chrysler 300 list server
> > since I will be out of town and going to the Auto Fair in Charlotte NC
> until
> > Sept. 16th.
> >
> > Please quote the specs and all available information for the respective
> high
> > speed starters and include terms and conditions, pricing, warranty info
> and
> > availability for your high speed starter replacements. You may also
> consider
> > listing your offerings for '62-'65 even though these are more readily
> > available.
> >
> > Since there are so many members that may take advantage of your
services,
> we
> > ask that you work on a special pricing list for members of the Chrysler
> 300
> > Club, Int.
> >
> > Thank you, in advance,
> >
> > Tony Rinaldi
> >
> > > From: Road Runner Starters <tim.wood@xxxxxxxxxxxx>
> > > Date: Mon, 08 Sep 2003 09:00:18 +1200
> > > To: Tony Rinaldi <awrdoc@xxxxxxxxx>
> > > Subject: Re: [Chrysler300] Any Interest in a High Speed Starter for
> > > 413CastIron 727 DriveTrains?
> > >
> > > Hi Tony, we manufacture a number of high performance starters to suit
> the
> > > early Mopars.
> > > There are 3 different starters that pre date the 62 and later T/Flite
> > > starters, there are also 2 different
> > > pitch 9 tooth pinions (25mm dia. and 29mm dia.this does'nt include
> > > commercial,industrial and marine of which there are more!) E-mail the
OE
> > > part #'s you are after and we'll
> > > go from there. Thanks for the inquiry. Regards Tim.
> > > ----- Original Message -----
> > > From: Tony Rinaldi <awrdoc@xxxxxxxxx>
> > > To: Owen & Jo Grigg <ram300@xxxxxxxxxx>; <tim.wood@xxxxxxxxxxxx>
> > > Cc: Chrysler 300 Club <Chrysler300@xxxxxxxxxxxxxxx>
> > > Sent: Saturday, September 06, 2003 1:24 AM
> > > Subject: Re: [Chrysler300] Any Interest in a High Speed Starter for
> > > 413CastIron 727 DriveTrains?
> > >
> > >
> > >> Hi Tim,
> > >>
> > >> Owen Grigg suggested that I contact you and see if you can help us
> owners
> > > of
> > >> '59-'61 with Chrysler 413 wedge/cast iron 727 TF drive trains get
high
> > > speed
> > >> starter replacements. Also '55-'58 hemi drive trains.
> > >>
> > >> The '59-'61 set ups have longer drive shafts and cannot interchange
> with
> > > the
> > >> available high speed starters that are compatible with the '62 and
> later
> > >> aluminum TFs which fit the shortened drive shafts of the later 413s.
> > >>
> > >> Tony Rinaldi
> > >>
> > >>> From: "Owen & Jo Grigg" <ram300@xxxxxxxxxx>
> > >>> Date: Fri, 5 Sep 2003 14:26:21 +1200
> > >>> To: "Tony Rinaldi" <awrdoc@xxxxxxxxx>
> > >>> Subject: Re: [Chrysler300] Any Interest in a High Speed Starter for
> > > 413Cast
> > >>> Iron 727 DriveTrains?
> > >>>
> > >>> Tony,
> > >>> If you would like to speak with someone who knows all about these
high
> > >>> speed, high torque starters, contact Tim at Roadrunner Starters on
> > >>> tim.wood@xxxxxxxxxxxx
> > >>> Owen
> > >>> ----- Original Message -----
> > >>
> >
>
>
>


------------------------ Yahoo! Groups Sponsor ---------------------~-->
Yahoo! Autos. Everything you need to know about buying or selling a car.
FREE Quotes, 360° Tours, Research,
Blue Book, Compare Vehicles, Buy Used
http://us.click.yahoo.com/kEZsdA/bwnGAA/YiGOAA/8LmulB/TM
---------------------------------------------------------------------~->

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm

To unsubscribe from this group, send an email to:
Chrysler300-unsubscribe@xxxxxxxxxxxxxxx



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
2003 Calendar voting results and ordering information is online!  Please visit:
http://www.forwardlook.net/calendar2003 for more information.



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.