A 1956 Chrysler Windsor with a poly 331 and 4-bbl carb? The 331 poly was
used on American-built Windsors, but they came only with a 2-bbl carb and
had no 4-bbl option.
Canadian-built 1956 Chrysler Windsors came with a poly 303-cid V8 and 4-bbl
carb, though. That is how Chrysler of Canada got the power of the 303 to
match that of the U.S. 331,
The 1956 Dodge Custom Royal used the same engine with a 2-bbl carb.
Chrysler of Canada also shipped the block to Detroit for the 1956 Plymouth
Fury. The 303 was used again in 1957 for the Plymouth and Plymouth-based
Dodge with either a 2-bbl or 4-bl carb.
Bill
Vancouver, BC
----- Original Message -----
From: "Don Uhl" <don.uhl@xxxxxxxxxxxxxxx>
To: <L-FORWARDLOOK@xxxxxxxxxxxxx>
Sent: Wednesday, December 11, 2002 5:30 PM
Subject: [FWDLK] 56 Chrysler
> Went to look at a 56 Windsor 2dr ht in the local paper yesterday.
> Hasn't been started in years but looks like it should fire up without
> too much trouble. Poly 331 with factory 4bl and dual exhaust. The car is
> yellow in color with black roof and accent. It has some rust along
> rockers and rear lower quarters. Odometer shows 47,000 miles. The best
> thing about it is that the interior is near mint. One split in a seem on
> the headliner, and one small hole in the drivers seat smaller than a
> dime. Side door panels and dash are great. Interior color is tan and
> black. Almost forgot to mention that it is all in the original leather.
> Only other problem is that a newer stereo was installed instead of the
> original. I will be picking it up on Sat and will be posting pictures
> shortly after.
>
> --
> - Don Uhl "Moparaholic" http://www3.sk.sympatico.ca/uhld/
>
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
2003 Calendar voting results and ordering information is online! Please visit:
http://www.forwardlook.net/calendar2003 for more information.
|
|
Back to the Home of the Forward Look Network