I have been told that you can use a 69 - 73 full size Chrysler product rear end without changing anything. I believe they are 54" from backing plate to backing plate! Not sure on the measurement....I have one from a 69 Newport convert to go in my 59 Sub., and I know the measurement is the same. John in WI ----- Original Message ----- From: "C. B. Kidder" <60Saratoga@xxxxxxxxxxxx> To: <L-FORWARDLOOK@xxxxxxxxxxxxx> Sent: Tuesday, September 03, 2002 6:21 PM Subject: Re: [FWDLK] Rear end swap > Good question, Bob. I am considering replacing the rear on my 60 Chrysler, > and wonder how much time my repairman will have to spend... > > Brion > > ----- Original Message ----- > From: "Robert Hanekamp" <bobsmopar@xxxxxxxxxxxxxx> > To: <L-FORWARDLOOK@xxxxxxxxxxxxx> > Sent: Tuesday, September 03, 2002 7:39 AM > Subject: [FWDLK] Rear end swap > > > > Hi All. > > Last Thursday I at a rolling cruise here in town we had about 300+ cars > > cruising main street. > > There were about 5 cars that had troubles mine was 1 of them. > > The master cylinder went out and I lost my brakes. > > Over the winter I am going to change the rear end out and put in one from > a > > 69 dodge coronet. > > Has anyone on the list done this to a 57 Plymouth. > > Is there any modifications that I will have to do. > > Any help on this would be great. > > Thank you > > Bob. > > > > -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- > > Need an answer fast? Search the 17,000+ pages > > of the Forward Look Mailing List archives at > > > > http://www.forwardlook.net/search.htm > > > > -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- > Need an answer fast? Search the 17,000+ pages > of the Forward Look Mailing List archives at > > http://www.forwardlook.net/search.htm > -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Need an answer fast? Search the 17,000+ pages of the Forward Look Mailing List archives at http://www.forwardlook.net/search.htm
|